trouble with lnbs

[5window]

goodmorning to all. im having troubles sorting out the correct settings for my ultra 2000. i am using a dn dish with 2 single lnbs. they are routed to a sw 21 switch. under lnb type which setting do i use? im using a tp freq of 12339 and and a lnb freq 11250 . lnb power is on, 22khz is off,switch is on,diseq 1 to port 1, motor off and legacy switch none ,this is for 119. for 110 setting for tp freq is 11224 and diseq 1 to port 2. all other settings are the same as 119. any and all help will be appreciated. thanks. 5window

[storman666]

OCS-DP is your setting.

[derby62]

119 echo 7 should be port 1 and 110 echo 8,10 is port 2 and tp freq 12224 for 119 and 12224 for 110 also some people say 12239 for for 110 but when you you do auto scan you will see it scan 12224. Good Luck!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[5window]

thanks to both storman 666 and derby 62 5window