cannot get antenna to set up

[5window]

i have been trying to set up my antenna. 119 is as so,lnb on,lnb type ocs-dp for two single lns going to a sw 21 switch,lnb freq 11250, 22 khz off,tp freq 12224, desqe 1.0 to port 1, motor off and legacy sw is on none. after changes are put in i press the f1 button. it does the search then tells me the search failed. i have not tried to enter echo 110. i cant get pass the failed search. i have taken out all splitters. the coax is running straight to the stb from the dish. what could be the problem? as always the help is appreciated. thanks,
5window

[chill dawg]

Originally Posted by 5window

i have been trying to set up my antenna. 119 is as so,lnb on,lnb type ocs-dp for two single lns going to a sw 21 switch,lnb freq 11250, 22 khz off,tp freq 12224, desqe 1.0 to port 1, motor off and legacy sw is on none. after changes are put in i press the f1 button. it does the search then tells me the search failed. i have not tried to enter echo 110. i cant get pass the failed search. i have taken out all splitters. the coax is running straight to the stb from the dish. what could be the problem? as always the help is appreciated. thanks,
5window

try legacy twin lnb 1 for 119 on port 1, and you may have to turn on to sw 21dish 1

post back and then we can see about echo 8 on 110!

[5window]

chill dsawg those settings did not work. i changed the lnb type to legacy twin lnb on diseqe port one. then tried f1 --this was a fail then tried the same but turned on sw 21 dish 1 this also failed. thanks for the try. 5window

[chill dawg]

Originally Posted by 5window

chill dsawg those settings did not work. i changed the lnb type to legacy twin lnb on diseqe port one. then tried f1 --this was a fail then tried the same but turned on sw 21 dish 1 this also failed. thanks for the try. 5window

What type of lnb do you have I'm not sure of what your saying in your first post?

[5window]

chill dawg, i checked the lnbfs on my 500 dish. it is a bsna5-506a. this has twin single lnbfs feeding into a sw21 switch.
thanks 5window

[tomcat01]

that is a circular lnb 12 bucker one lnb should be standard or single

[Landscapeman]

Here are some settings that should help

Satellite: Echo 7
LNB Power: ON
LNB Type: Standard
LNB Freq: 11250
22KHz: OFF
TP Freq:12224
Diseqc 1.0: Port 1
Motor: OFF
Legacy SW: NONE

Satellite: Echo 8
LNB Power: ON
LNB Type: Standard
LNB Freq: 11250
22KHz: OFF
TP Freq:12224
Diseqc 1.0: Port 2
Motor: OFF
Legacy SW: NONE

[tomcat01]

do what chill dawg said and turn on thesw dish 1 on and try that and then try the legacy lnb setting too .. i found it on the web and i looks like a circular like bev uses so it is either standard single or legacy try them with sw dish 1 on and it should work