VS 2000 Ultra file not working for Anik F3

[samola]

Hello all,

I have a viewsat ultra and have downloaded the latest file PFTAUSW-080904U.PGM but the Anik F3 (118.7) channels are not working. its stuck on the autoroll process. All the other channels are working.... is the any other file that i need to load that will open these channels?

Thanks for your help with this!!!

[edwinsao]

just wait till the autoroll do the job,welcome to aba and please dont post in the download section

[samola]

Hello Edwinsao!

Thanks! I had left it for more than an hour but nothing.... does it take that long for the process to get the channel?

[edwinsao]

did you had this problem before??

[ka1300]

Even I have the same problem...Not working for Anik F3. Never had the problem before. Below are my antenna settings:

Satellite: Anik F3, 118.W
LNB Power : On
LNB Type: OCS-DP
LNB Freq: 10600
22 KHZ : On
Tp Freq:11715
DisEqC:; Port 3
Motor: Off
Leagacy SW : None

Below is my 119 Settings:


LNB Power : On
LNB Type: OCS-DP
LNB Freq: 11250
22 KHZ : On
Tp Freq:12224
DisEqC:; Port 1
Motor: Off
Leagacy SW : None

Below is my 110W settings:

LNB Power : On
LNB Type: OCS-DP
LNB Freq: 11250
22 KHZ : On
Tp Freq:12224
DisEqC:; Port 2
Motor: Off
Leagacy SW : None

[samola]

I did not have this problem before... although i have had the dish for am month and half and the last time in September i loaded the files and everthing came back with out any issues.. but not today!

[googleisapig]

I have same problem with this new file. I never had such problem before. Also I don't have such problem in CS6100. I I believe the file need to be fixed.
Thanks.

[just4ufolks]

There are others reporting such issue and if i recollect some have indcated that do the FACTORY DEFAULT -RESCAN your relevent desired SAT and reload your current working file to restore your reciever to last working status..

AGAIN be sure to write down the antena settings and other related info as Factory Default will erase them and you will need to reset as needed..

Hope that puts a perspective-wish you gud and hope ur watching ur fav channel soon..enjoy d show..

[jpeterson]

ka1300,

Change your LNB frequency to 10750 for Anik F3.

[ka1300]

I did factory setting, rescanned the channels and loaded the new bin...No luck yet on the Anik F3 channels...The 110 and 119 seem to be working fine like before....Can anyone help please?

[jpeterson]

Originally Posted by ka1300

I did factory setting, rescanned the channels and loaded the new bin...No luck yet on the Anik F3 channels...The 110 and 119 seem to be working fine like before....Can anyone help please?

Did you change your LNB freq to 10750 for Anik F3?

[googleisapig]

Originally Posted by just4ufolks

There are others reporting such issue and if i recollect some have indcated that do the FACTORY DEFAULT -RESCAN your relevent desired SAT and reload your current working file to restore your reciever to last working status..

AGAIN be sure to write down the antena settings and other related info as Factory Default will erase them and you will need to reset as needed..

Hope that puts a perspective-wish you gud and hope ur watching ur fav channel soon..enjoy d show..

just4ufork,
It does not work.
New file need.

[samola]

Here are my settings:

Satellite: Anik F3, 118.W
LNB Power : On
LNB Type: Universal
LNB High: 10750
LNB Low: 9750
TP FREQ.: 11715
DisEqC:; Port 1
Motor: Off
Leagacy SW : None

Below is my 119 Settings:


LNB Power : On
LNB Type: Standard
LNB Freq: 10750
22 KHZ : OFF
TP Freq:12224
DisEqC:; Port 1
Motor: Off
Leagacy SW : None

Below is my 110W settings:

LNB Power : On
LNB Type: Standard
LNB Freq: 11250
22 KHZ : Off
TP Freq:12224
DisEqC:; Port 2
Motor: Off
Leagacy SW : None

I am in the process of rescaning all the channels and will let you know if resetting to factory defaults and then importing the new file worked!

Thanks,