trying to connect - ABA DSS

output · November 16th, 2006

just got a sonicview 1000 trying to get it working???? how do a find a satellite and is there anything i need to do with the reciever...please help!!!!k

output · November 16th, 2006

[quote=output;57600]

just got a sonicview 1000 trying to get it working???? how do a find a satellite and is there anything i need to do with the reciever...please help im retarded!!!!k

**mountaineer** · November 17th, 2006

Flash the receiver with the latest bin to start. Their is a dish pointing program to help you point your dish. To set up the receiver, you need to know what type of lnbs you are using. Post back with more info.

**arboristman** · November 17th, 2006

see my sig below for the dish point tool.

**LearJammer** · November 22nd, 2006

got my sv1000 to work for about 5 min,all chan&locals
once information was up dated,losted everything but ifo?????????

**carpenter1** · November 22nd, 2006

Quote:

Originally Posted by LearJammer

got my sv1000 to work for about 5 min,all chan&locals
once information was up dated,losted everything but ifo?????????

If you have the latest file in it then turn OFF the receiver for 5 sec. then back ON using the backswitch and let it sit untill the picture comes back.

**LearJammer** · November 22nd, 2006

thanks,just tried,so far so good,

**tango** · November 22nd, 2006

1. Plug turn on the STB (the STB need to be on so your PC can detect the USB)

2.Plug the square end into DEvice (on stb) the flat end other to your 2.0 USB port on your PC

3. Install the driver (windows will auto detect and ask you to install the neccessay driver for the device.

4. TURE OFF YOUR STB (usung back switch)

5. On your pc, open USB loader or TFTPServ, open the necessary file you wanjted(YOU NEED TO TURN STB FROM THE BACK BEFORE OPEN USB LOADER)

6. Then turn on your stb (using back switch) Good luck

**tango** · November 22nd, 2006

To check or change the keys

ON remote hit menu>>Enterainment>> press 7890>>Code. Press on code and you'll see the key lists

Also need a null cable.

HAPPY THANKSGIVING EVERYBODY

Quote:

Originally Posted by tango

1. Plug turn on the STB (the STB need to be on so your PC can detect the USB)

2.Plug the square end into DEvice (on stb) the flat end other to your 2.0 USB port on your PC

3. Install the driver (windows will auto detect and ask you to install the neccessay driver for the device.

4. TURE OFF YOUR STB (usung back switch)

5. On your pc, open USB loader or TFTPServ, open the necessary file you wanjted(YOU NEED TO TURN STB FROM THE BACK BEFORE OPEN USB LOADER)

6. Then turn on your stb (using back switch) Good luck

dwc827 · November 23rd, 2006

my comp will not detect my sv1000 why?

666elsie · November 30th, 2006

be sure u have a good port -loader-and a must null cable

then u should be ready to go load be sure ur settings are set like CC off, time date are set,auto roll on.

streamer · December 2nd, 2006

Help currently test coolsat 5000. works great. No signal with the pvr1000. Is the dish setting different? Have loaded pvr0104B_P?

Quote:

Originally Posted by mountaineer

Flash the receiver with the latest bin to start. Their is a dish pointing program to help you point your dish. To set up the receiver, you need to know what type of lnbs you are using. Post back with more info.

tomasz · December 23rd, 2006

Hi there i have a sonicview 1000 and i am experiencing a problem with the receiver. Every time after watching tv i turn the receiver off and when i try to turn it back on after with the remote it gives me a message ( no service or scrambled ) but when i turn the rear swith off and on it seem to be working fine. What can I do to fix this problem to turn my receiver on normally using the remote insted of using the back switch?

**carpenter1** · December 23rd, 2006

Leave the receiver On all the time, I never turn off my receiver that way when the keys change it gets them right a way.