ABA DSS - Free to Air Satellite TV Community - View Single Post - is this possible (Connect up to 16 satellites )

road dog · March 10th, 2008

I seen this ad below somewhere and want to no if that is correct.Now I have two sats 119 & 110 with no switch.Is it possible,and how would I go about it.Thanks
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
`````````````````````````````````````````````````` ``````````````````````````````````````````````````
Connect up to 16 satellites to one receiver with AVR DiSEqC switch
DiSEqC-Switch is widely used in individual satellite systems to connect up to 16 satellites to one receiver using cascading[/URL] method. This switch uses other cheap DiSEqC-Switches ver1.0 with four satelite heads each or simply connects directly to satelite heads and this way acts as simple switch

March 10th, 2008	#1 (permalink)
road dog FTA Novice Join Date: Jul 2006 Location: south florida Posts: 97 Credits: 395.80 Thanks: 21 Thanked 6 Times in 6 Posts	is this possible (Connect up to 16 satellites ) I seen this ad below somewhere and want to no if that is correct.Now I have two sats 119 & 110 with no switch.Is it possible,and how would I go about it.Thanks ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ `````````````````````````````````````````````````` `````````````````````````````````````````````````` Connect up to 16 satellites to one receiver with AVR DiSEqC switch DiSEqC-Switch is widely used in individual satellite systems to connect up to 16 satellites to one receiver using cascading[/URL] method. This switch uses other cheap DiSEqC-Switches ver1.0 with four satelite heads each or simply connects directly to satelite heads and this way acts as simple switch Last edited by arboristman; March 10th, 2008 at 01:33 AM.. Reason: links