Sat 119

[profffit]

Is there an area you can go on the receiver where it will tell you if you are connected to the 119 or is the only way to know is by the channels you receive?

Thanks

[coorslightly]

what receiver do you have ? on the pansat 2700 if you click on the green button it will show you what Sat your currently on.

[profffit]

3500 SD

currently stuck at 28% on Scanning Echo 7 channels. Has not moved in a few minutes.

[coorslightly]

Do a hardboot on your receiver. just turn it off and on to reset it. everyone should always reboot there receivers if its acting up. gives it a fresh start by doing that. then its back to normal. just like you would with your computer.

[myxlplk009]

Originally Posted by profffit

3500 SD

currently stuck at 28% on Scanning Echo 7 channels. Has not moved in a few minutes.

2700A will freeze when scanning a sat if you're trying to scan over a channel list, just do a factory re-set and start your scan all over and it will be fine

[jpeterson]

When you turn off the receiver, leave it off for atleast 2 minutes. Then turn it back on.

[tango]

Originally Posted by profffit

Is there an area you can go on the receiver where it will tell you if you are connected to the 119 or is the only way to know is by the channels you receive?

Thanks

If you can see channel 100 its 110 sat ,and if you can see 213 Nasa its 119.