Pansat 2500a Start Up.

[prtonycl]

HELLO everyone. !!
I'M A TOTAL NEWBIE AND READY TO TAKE A PLUNGE IN THE WORLD OF FTA.
I HAVE READ AS MUCH AS POSSIBLE WITHOUT GETTING TO CONFUSED.
HERE IS WHERE I STAND BEFORE GETTING IN THE RING TO FIGHT. IF THERE IS ANYTHING ELSE PLEASE ADVISE.

1. WINDOWS XP , RS-232 CABE F/F , PANSAT DISEQC SWITCH
2. PANSAT 2500A RECEIVER
3. DISH 500 DISH LeGACY TWIN ( removed dual lnb and replaced with 2 - dave
single lnbs.
4. G-TOOLS V 1.85 ;, STB UPDATER APPLICATION VERSION 2.1.0.0 OR
BLACKLIST STB UPDATER 1.3
5. NORMAD BIN FILE ****** 09-30-X-8500 (2500 pansat bin)
6. CHANNEL LIST ??? ( I'M IN CLEVELAND , OHIO ) I WILL BE PICKING UP
ECHO 6,8 - 110 , ECHO 7 - 119
7. PANSAT 2500A MANUAL 3B
8. I HAVE MY DISH ALIGNED AND READY TO GO WAITNG FOR MY RECEIVER .

I HAVE A FEW QUESTIONS. I NEED HELP WITH.

1. HAVING WINDOWS XP WILL EVERYTHING I MENTION ABOVE BE COMPATIBLE.

2. WHICH UPDATER WORKS BETTER WITH XP.AND EASIER TO USE.

3. ANY RECOMENDATION FOR A CHANNEL LIST FOR CLEVELAND , OHIO
SATELLITES 110 & 119 ONLY.

THANKS, IF YOU CAN HELP OUT.
THANKS TONY

Im running XP currently, you should have no problem.

You only need the channels listing if you using the DP lnb


You are ready, go for it

-dssman

[prtonycl]

Originally Posted by dssman

Im running XP currently, you should have no problem.

You only need the channels listing if you using the DP lnb


You are ready, go for it

-dssman

thanks for the feed back dssman !!!! If I'm using two separate lnb's on my dish do you recommend using a blind scan , sat scan or what ? Not sure about that
part ?

thanks tony

you will get the same result.