Locked up Pansat 3500

[billyb313]

My receiver locked up while reflashing a bin now all it says is b-70. I've unplugged it turned it on and off on back to no avail. I have no other control over it ie. remote, front buttons. Please help.

[odissseusss]

Ok , b-70 was the old flash those boxes used, now you have to flash to the new b-80. All new bin will only work with the b-80 flash. The last bin for the b-70 was the 367. After that bin all new bins will only work with the new b-80. So i sugest that you flash your unit with the b-80 using latest loader and then load latest bin 319.

Go here http://www.abadss.com/forum/pansat-3500a-downloads/
and you will find all the files and instuctions need it. If still can flash it let us know and we will try to keep helping you.

[billyb313]

how do i flash it without any controls? Can't get to menu or anything. do i have to do it by computer. the cable that came with it won't attach to my laptop. Thanks. Any help will be greatly appreciated. Not well versed in FTA speak.

[panelman]

you have to get a serial to usb adapter and use the cable to flash it back to factory bin by doing a cold boot flash. meaning that you use the loader pc to stb button then turn the switch on the back let it run its course about a minute or so it will reboot. then flash with b80 software all in the 3500 discusion section

[billyb313]

I'll get one tomorrow and try it. Wish me luck and I'll let you know.

[haiau76]

My receiver locked up while reflashing a bin now all it says is b-80. I've unplugged it turned it on and off on back to no avail. I have no other control over it ie. remote, front buttons. Please...

[arboristman]

flash the factory b80 bin to it.then the current bin.