problem with new bin 114 file

[seymour]

downloaded the 114 for pansat 2700 and tried to flash the box with the latest gtool for pansat 2700, but every time i tried if stops about 5 percent and the box reboots by itself....

any help please or any inside ideas..

thanks

[mountaineer]

Make sure the file is unzipped, and use gtrom loader v3.32 to download bin to the receiver.

[pakundo]

Make sure the file is unzipped....


unzipped as RAR. or winzip?????? it is extracted by rar. t.i.a...

[mountaineer]

Use winzip, the file should be 768 kb when unzipped.

[mountaineer]

Try sending the factory bin into it.

[seymour]

thanks a bunch i'll tried this and let you all know..

thanks

[seymour]

the gtloader that i have is v3.35, where can i get the v3.32??????

[mountaineer]

Is your coolsat a 400 or a 4000pro ?

[seymour]

no i have a 2700a pansat..

[mountaineer]

Got my answers messed up. Stay with the newer loader and try the factory bin. Did the 2700 work with the same computer and cable before?

[perezcuco]

Originally Posted by seymour

the gtloader that i have is v3.35, where can i get the v3.32??????

Use the 3.35.it works great.Just try to delete the file,and download it again, unzip it, and send it to your STB.Make sure you are selecting the rights settings.

[seymour]

i hav e the original null cab le that came with the pansat2700 box, i am using this cable, yea it work before with the 111 bin file. but now is just getting to 4 percent the it reboots by itself. also tried the factory bin and it did the same thing.

[seymour]

i wil downloaded again, and tried again, but how will i sent it to the STB??? this gt loader does not has this field!!!!

[mountaineer]

You don't still have the lnb line connected, stupid question.

[seymour]

Well I dont know about stupit questions, there is no such thing as stupid question, (he said download and unzip and send it to the STB) which is why, i ask how would you do this in the gtroomloader, anyway i still can not flash my box with the new bin file.

[Dozerman_2k]

This is what I have found to help load bins to 2700's. first, naturally unzip and point the loader application to the 114 .bin, at the point where all is ready and you are about to click on the app. to load the bin, turn off the 2700 from the switch on the back or shut off power,I use a power strip with a off/on switch, then power it back on, as soon as you see the green light, click in the app. to load the bin. I have had problems getting bins to load and this usually helps. if it doesn't , oh well, nothing lost.

[seymour]

Listen ,, thank you for the information, i will give a shoot at it,..

thanks

[seymour]

still can not loaded the dam file... the applicatons hangs.. in the middle of it.