new bin - ABA DSS

**bogus** · November 8th, 2005

here is the bin with the new keys already in

jessie10 · November 8th, 2005

bogus do you know if this bin is good for pansant 3500? do i upload that with the GTROM LOADER 3.36? THANKS..

**perezcuco** · November 8th, 2005

http://www.abadss.com/forum/20-specific-file-requests/3425-plase-read-before-posting-2nd-page.html

jessie10 · November 8th, 2005

Perez Cuco Do We Have To Pay To Have Thenew Bins? Because I Went To The Link You Posted And I Can't Upload The Bins ... Thanks A Lot

saveddj · November 8th, 2005

I loaded this BIN, and still no channels.. is there something additonal I need to do?

domunz · November 8th, 2005

will I be able to update the keys if they change in the future with this bin?

Quote:

Originally Posted by bogus

here is the bin with the new keys already in

3Khan · November 8th, 2005

The Key is in alright but still no TV... what up with that?

saveddj · November 8th, 2005

I got it working... had to manually enter keys.. and forgot to hit "ok" to accept changes. NOt sure if it was th eBIN or my manually entering the keys that work -- but Im watching Nip/Tuck tonight baby!

wendshell · November 9th, 2005

i tried to load this BIN file into the Pansat 2700A, and it says flash update fail. i did everything as they suppose to be done. any boby has any ideas

**bogus** · November 9th, 2005

Did you unzip it?

**perezcuco** · November 9th, 2005

When the "Flash Update Fail" appears, that means:
1-You are using the wrong cable(for 2700 null).
2-You selected the wrong COM port.
3-You are using the wrong loader.
4-The bin file is corrupted.
5-The bin file was not unziped.

toto_404 · November 12th, 2005

He's right same thing appen to me. As soon you turn the receiver on, it went bach to the previous channel before turn off and imposible to download the bin in the receiver.

**mountaineer** · November 12th, 2005

Start the download before the receiver fully boots up, that will work.

toto_404 · November 13th, 2005

I keep doing that. It works for the 2500 but not the 2700.
The 2700 stays at on only for 2 second. Not enough time for download to start.
Any other solutions?

**bogus** · November 13th, 2005

Turn on the receiver with the switch on the back then start the download. That worked for me.Let me know.

**carpenter1** · November 13th, 2005

bogus knows just use the switch in the back of the reciever but make sure you have the bin loaded in the loader so as soon as you see the reciver's display hit the loader to load your reciver then you should have no problem.

trebla · November 14th, 2005

I Have tried all 3 ways to download the files and all worked: On Pansat 2500A, 2700A and Coolsat 4000pro.
After the receiver connected to Pc and power with the back switch OFF, I download the loader for the receiver I am working on, and install the bin in it.
1- Soon as I saw the first night rider light I click download. Allways worked fine, in all 3 receivers. This is the way I prefer.
2 - Like they say in the manuals (Pansats and coolsat) with the receivers ON. Click download/connect and it worked fine too.
3- With the loader all set I click download and turn the back switch On. Worked fine too.
4- In the coolsat, with the loader ready, back switch On, clock on in the front with the red round light on, in the bottom, I just clicked CONNECT and download the bin just fine.
But I prefer when the loader is all set, and I see the first night rider light, just click download or connect and wait until the receiver reboots on. Than I turn the back switch OFF, unplug the receiver and remove the the null or straight cable that comes from the PC to the receiver. I have been doing this way since the bin 105 for Pansat 2700, and 128 for coolsat to the present 119 an NORW 109 and always worked fine. Trebla.