Can't find 119

[Carlito]

I've installed 6 of this things within 3 months I know where 119 is in relation to 110 but no signal on 119.
Can see all of 110 at 90+ quality level But 0% on 119 not even a blip on the screen when trying to find it.

Dish: standard 18" single lnb with seperate lnb attached
DISEQ SWITCH: using #1 for 110 lnb using
#2 for 119 lnb
Reciever: Pansat 2500a with x-85bl.....237 api(n) and New Key loaded
I've tested each lnb sepereate and are working
I've tested different DISEQ Switch postions 1-4 and all work
I've tested both coax cables and work

My Reciever settings are
LNB Type: Standard
LNB Freq.: 11250
22khz: off
Diseqc: #2
skew: 0
tp: {8}
Positioner settings: Disabled
Satt scan: all

The only thing I can think of is that this place is a very wooded area, is it possible to recieve 110 strong 90+ but have 119 be interfered by dents trees?


The zip code is: 12306 schenectady New York
Dish is pointed at Az: 245 El: 26

Any suggestions?
Thanks everyone
Carlitos

[mountaineer]

I would think if you get good 110, you should get at least a little signal on 119. It is only about an inch to the right and an inch down. I would keep looking.

[chief]

I lost 119 today, too. It scanned all the channels then went away. Is the satellite down?

[bogus]

Not down, you have other problem.

[tanduckjibe]

I got both 110 and 119 but I can only view some channels on each bird..Not all channels.
No MTV or ESPN
Use my dishpro.
Anyone know what wrong?
Thanks!

[mountaineer]

Dishpro requires a special channel list just for dishpro.

[vze4fhpv]

I just got up and running. I downloaded channels for 110/119 and Nimic 1 (Bell/Bev) the canadian which comes in fine but I can't view 110/119 what's up with that. Please elaborate on special channel list mountaineer?????

[mountaineer]

A dishpro will only look at vert. tps. So a dishpro channel list has the horiz. tp's recalculated to a higher freq. The setting is then changed to vert. That was for tanduckjibe in post 5.