Still no 119

[richie]

I couldn't get 119 with the 264 bin,so I switched to the 267 and have the same problem.Do I need to add a dummy sat with this bin? If so, could someone give me detailed instruction on how. I tryed to do it with the 264 but I don't think I did it right. I don't get the part where you put the sat on the top of the list--the only way I can find to even add a sat is to click on edit and go to add sat. Please help!!

[mountaineer]

You can use channel master to add the sat, it is very easy. Another way is to set to factory which will setup all the sats from the satcodx file then setup your lnb's again and do a blind scan.

[bogus]

click on the dummy sat and a window will open and in there will be a place that says move up. hit that and it will go up a level.

[richie]

I don't know what's wrong ,but I can't figure out how to do this. I have chan master 1.9. Can I do this with this version? I would try what Mountaineere said above but that's all greek to me. It's been two years now and this is the most trouble I've had. Maybe I need some detailed instruction,I feel like I just started at this. Thanks!!!!!!

[richie]

My problem is,I can,t get my sat's to display! I've tryed clicking on the sat but,get no popup box. The only way I can get my sat's to come up is to click on tools and then satellite then add. This does add a satellite to the top but doesn't work. Should this work? I could'nt find a Pittsburgh channel list so I uploaded the list from my machine,could that have anything to do with my problem? Thanks.

[bogus]

Sounds lika a problem with channel master. Try reloading CM. Or updating it.

[richie]

If I understand right,I should have a satellite tab in the upper lefthand corner along with the file,edit,view,window, and help tabs. Is that correct?
The only place I see the word satellite is in the project window.
I have version 1.09. Is there somewhere I can get an older version? Thank You!!

[bogus]

project window is what u want.

[richie]

After 50 times I finally got it. This was really stupid,my ch master screen was shrunk down to where the project box was hiding the sat & favorite behind it. Thanks for all your help.

[richie]

Bogus, I'm still having trouble. I loaded the ch. list with the dummy on top,and I got the nightrider lights,so I reloaded the 267 bin and I'm right back where I started. All 110 but no 119 the name of the show that's on appears on the bottom but scrambled picture,just like it was before changing the channel list. Any idea what's up with that?

[bogus]

how about the switch setup in installation is it correct ?What kind of quality do u have ?

[richie]

Quality is between 70 and 90 on all. I never had any problem with that. I tried changing switch settings, no good. I noticed on my satellite screen it shows my dummy sat on the bottom, is that ok or should it be on top?

[bogus]

No, move your dummy sat to the top in channel master and reload the list.

[richie]

I did that a few times that's when I get the nightrider lights what could I be doing wrong ? the ch list im using is exactly the same all i'm doing is moving the dummy to the top and i get the nr. lights

[bogus]

try reloading the factory bin to clean it out.

[sirren]

Richie;
I too got back from Christmas vacation to find I had to load the new bin 267. And yes I got only one bird (110) I looked for help and started following Bogus and Perezcuco directions and had no problem restoring 119. I did find that the bin changed the sat order one my superdish to 119 = 3 and 110 =2 (?) but when I reloaded my Sat channel list (Thanks to Bogus and Perezcuco list sent to me last Nov) and put sat 91 on top and re-numbered the sat order to Dummy sat on top to off and 119=1, 110=2 everything came back. My only question would be do I need to reload the factory bin and then reload the 267 bin even if I'm working now? And does any one have an updated channel list (Hint Hint Perezcuco/Bogus). Happy New Year to ALL

Sir Ren