reboot

[UNO]

I have a pansat2500a, went I download the bin file it says download complete, but the receiver don't reboot keep getting straight line going across.I didn't have any problem with my first receiver. Can anyone help please? thanks

[mountaineer]

Try to download again. Make sure you give it enough time to finish. If that doesn't work, load the factory bin and try again.

First of all, Please check the serial cable (this is very important) i don't know how many idiot i have seen misconnecting the cable.

1. Swtich unit off in back.
2. open the pansat downloader 2300-2500-1500 downloader.exe file
3. Enter "Pansat 2500A" in stb type (no quotes)
4. Select Boot60.bin in Bin window
4. Turn on back switch
5. Before - - - - completes, start the download and let it finish.
6. Turn off pansat backswitch
7. Turn pansat back on
8. Now you should see Knightrider lights - - - - back and forth over and over. This is normal.
9. Now load the Pansat factory bin (Pansat 2500A-040730_224_api(N).bin) in 2300-2500-1500 downloader.exe
10 Make sure STB type says "Pansat 2500A" (no quotes)
11. Start download... let it complete. The reciever will reboot when done.
12 Turn unit off and on again with back switch. Let the pansat boot up all the way.
13 Load the new bin 237 or 240 or 243
14 IMPORTANT -- CHANGE THE STB-TYPE to read "key:global" (no quotes)
15 Download the bin and let the receiver boot up by itself.
16 Now you are done... just load a good channel list and watch TV again.

[UNO]

thanks king, I got to reboot,now I'm going to the next step."THANKS AGAIN"

[gadget255]

I have tried as you (king1999) suggest but I got error stating model name does not correct.

be careful no quote

[gadget255]

oops my bad

[tieutanduong]

thanks alot

[tieutanduong]

thank you so much