Scrambled or Bad Channel

[antonio01]

Getting Scrambled or Bad cahannel message on all VOD's and all other channels except PPV previews - I reloaded 272 bin - blind scan - keycode on - autoroll off - latest keys from keymaster - even tried autoroll on - rechecked keys 3 times and still nothing - any other suggestions?

[carpenter1]

Try turning unit OFF for 5 seconds and ON again using the backswitch and another thing to try is Set Default Keys.

[antonio01]

Carpenter, I tried all of that,however i just noticed that under my "Antenna Setup" the positioner settings for echo 7 & 8 were DISABLED is that the proper setting or is it USALS and do I need to set the latitiude and longitude?
Thank You for your quick response!

[carpenter1]

That is only if you are using a motor.
Did you check the keys with KeyMaster?
Here is the link.
http://www.abadss.com/forum/keys-dis...ey-master.html

[antonio01]

Yes, I checked the keys with keymaster and they are current - I also noticed that when I hit the OK button and the channel list pops up and all of the channels appear and it tells me which channels are echo 7 or 8.6 but on the very bottom it always stays on 119W never 110W is that correct?
Thank for your time!

[Drockstar]

When you are in the antennia setup. Do you get good quality on the 110 bird?

Even if you are getting no reception on that sat it will say Scrambled or Bad Channel.... Coolsats will say No Audio or Video......

I would look at the 110 settings and rescan the sat.... Make sure autorolls are off.

Do a cold boot on the reciever like Carp said...