How To Load Sv-4000 With Usb Memory Stick

[grasshopper]

1 DOWNLOAD FILE
2 UNZIP FILE
3 SAVE UNZIPPED FILE TO MEMORY STICK
4 PRESS MENU
5 INSERT MEMORY SICK INTO FRONT USB PORT
6 CHOOSE INSTALLATION
7 SCROLL DOWN AND CHOOSE USB MASS STORAGE
8 PRESS OK
9 SCROLL DOWN AND CHOOSE CORRECT FILE
10 PRESS RED BUTTON AND FILE WILL LOAD
11 DON'T TOUCH FILE WILL LOAD AND MACHINE WILL REBOOT ON ITS OWN


If you would like to load with serial port and cable , or need help set up sats please refer to SV-1000 loading here:
http://www.abadss.com/forum/sonicvie...step-pics.html

Loader here:
http://www.abadss.com/forum/sonicvie...el-master.html

Download abadss toolbar and always stay connect
Our Toolbar

[manuel30]

hello, im new here and i got 4000 soniview, but don't how to fine the program to make it work,because i don't have no channels

[glsouth]

Thanks, I got some chanels now, but would like to get ESPN. It is there but it does not have any service. Can you help me?

[nadia4me]

hi im new here and i bought sonicview 4000 i want to get files somr please help me

[basketballgigi]

Hi, What is the easiest way to reload your system? I have a sv1000 and a 4000. Would using the usb memory stick for the 4000 be the easiest?

[o2bnaked]

Tried to go there with Maxthon & Explorer both....

[IMG]res://ieframe.dll/info_48.png[/IMG] The webpage cannot be found


Now what do I do???

[o2bnaked]

Originally Posted by o2bnaked

Tried to go there with Maxthon & Explorer both....

[IMG]res://ieframe.dll/info_48.png[/IMG] The webpage cannot be found


Now what do I do???

I WISH I had saved my money & NEVER purchased one of these **** receivers......

[jayjay1972]

Originally Posted by manuel30

hello, im new here and i got 4000 soniview, but don't how to fine the program to make it work,because i don't have no channels

manuel after you follow the instructions grasshopper posted above then adjust your settings for whatever sats your pointed at. Then just scan for channels give it a few min and let the auto roll do its thing. You will be watching tv in no time

[jayjay1972]

Originally Posted by o2bnaked

I WISH I had saved my money & NEVER purchased one of these **** receivers......

if your talking about the sv4000 i dont see why its a pretty good stb. It easy to load especially with the usb function.

[grasshopper]

Originally Posted by o2bnaked

I WISH I had saved my money & NEVER purchased one of these **** receivers......

Tell me why you don't like it. this is one of the easiest box to setup, within few clicks and you are able to watch TV. Follow my guide above...

[vroy]

to load a file using usb you most first down load the file. this means that you should subscribe to a site that supports it. That what I did. after I got my membership I was granted permissions to download the files needed to flash the new bin file. if you try one of these non-subscription sites you will get junk trust me I tried that and I got junk. subscribe then go to the link for the sonicview file downloads click on file choose open, then extract it to your usb thumb/pen drive. then just insert it in your machine, go to the menu button and select installion menu, scroll down to usb mass storage press the ok button, it will then show your drive. press update it will show you the bin files on the pen drive, select the newest one by scrolling to it, up dn arrow keys, then press the red button that is next to the green button that is close to the number keys. it will start the down load by its self. do not remove the usb pen drive until the box shuts it self off and then restarts (that is real crititcal) if ypu have a dish net sat try to scan echostar 8,10 and echostar 7 by selecting them and pressing the scan sat button, this takes awhile, ten minutes or more somtimes (do not use blind scan as it will take forever and does not work that well) There are setting that you need to know about the differant sats that you can scan and that gets pretty complacated, you will need to do a bit of reading. after the sats have scanned you should have to press finish, then do the next sat you want to scan. again press finish. after that press the exit button and wait about five minutes for the first time. if no channels come on the press the epg button and see if you have done the scans correctly as the channels will show up there. if you see channels you should try a channel like the history channel. if you do not see channels in the epg menu then you have not scanned the sat correctly or you neeed to find the ones that are compatable with your dish. THIS IS A HOBBY it will take time and patiance to figure it all out but that is what make it fun, I like a good brain treaser and this hobby is keeps me there... I bought one of these units and having never used FTA before I was up in about an hour, it took me weeks to get enough info to start getting all the goodies. well god luck to you, but if you dont want a hobbie then pay the cable company