Here Is The DP Pro LNBs setup For Sonicview

[tddallas]

So all i needs to do is set my SV4k to this 2 signals and i'll get everything the same way i did with my crappy cs6k?? Can i be able to scan any other signals beside these two?? please let me know. thank you

[Tootsie Roll]

Originally Posted by grasshopper

Use this for setup for DP Plus, DP twin & DP Quad LNBs. This setup is for 110 & 119 without using any switches, one cable carry both signals

Satellite 110 - Echostar 8,10 or (6,8)

LNB power----------- on
LNB Type------------ OCS-DP
LNB Freq------------- 11250
Transponder--------- 12224
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 2
Motor--------------- off
Legacy switch------- off

Satellite 119 - Echostar 7

LNB power----------- on
LNB Type------------ OCS-DP
LNB Freq------------- 11250
Transponder--------- 12224
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 1
Motor--------------- off
Legacy switch------- off

Stay connected to us - and get so much more - with the abadss.com Community Toolbar!
Click Here To Download Our Free Toolbar

Hi GH. You mention this setup is for not using switch, therefore, going to 1 receiver only. But, what if I have 4 receivers from 2 dishes with DP dual lnb's , what settings and switch connections shall I use?
Thanks.

[Saleh]

I have a question:
Now we know the setting for 110 & 119 (echo star 6&8 and echo star 7 )in Dish 500.
If there is another dish for 61.5 (International Channels) installed with Dish 500 (110 & 119) how would be the settings for the 61.5 (echo star 3)
Thanks for all the help.
Saleh

[cisco123]

get you a dp34 switch 3stbs and hold 4 sats

[fordman01]

Originally Posted by Saleh

I have a question:
Now we know the setting for 110 & 119 (echo star 6&8 and echo star 7 )in Dish 500.
If there is another dish for 61.5 (International Channels) installed with Dish 500 (110 & 119) how would be the settings for the 61.5 (echo star 3)
Thanks for all the help.
Saleh

does it plug in the dish500 or do you have a switch???

[Saleh]

Thank you Cisco123 & Fordman 01 for your replies.
I am not sure if the small didh for 61.5 is pluged in Dish 500 OR not. Both dishs were installed by DN on the roof of the house.
Can you tell me if the settings will be different in both cases.
Can you tell me the settings in each case.
Thank you again
Saleh

[cisco123]

what kind of stb do you have? and ya need to find out if your single runs into your duel

[Saleh]

Thank you cisco123
The receiver is Sonicviw 4000.
As I said before I am not sure if the single runs into the dual or not as the installation was done by DN. on the roof of the house.
Now I can do the settimgs for Sat 6 & 8 and slso Sat 7.
If the single runs in the Dual how would be the sttings for the single and If the single does not go in the Dual how would the setting be for the single ?????
Tjank you again.

[turkeyshooter]

I have the same problem, did anyone ever get an answer to this problem? Thanks in advance.

[cisco123]

what prob is that?

[Emptyhorse]

Hi I am new and want to know how to get started I have the SV-4000

[royalr44]

thanks alot!