Help

[heman]

I just bought a sonic sc8000 and downloaded the new bin hd8000 v0426p charlie update and i get some channles but now ppv chan or hd channles or the venuis channles i get some movie chan but only sound no pic ... not to sure what im doing very new to this and the dealer i bought it from didnt give me any info My setttings are sat echostar 8,x lnb single 22 khz off lnb power on transponder 12224 signal is hiogh and quallity is 80 to 92
search option all network search on diseqc off Motor enable Legacy switch off i have 2 30" bell dishes and one bell switch with 2 lnb's pointed at 91 and 82 going into that switch and leaving that switch into the another 22khz switch wich the other dish set to 110 then to reciever.
CAN ANY ONE HELP!!!

[bigevil69]

i moved your thread to the help section instead of the download section

you will not get but just a few if any standard def channels on 91w and none on 82w because bev has switched to nag3

if you want hd channels then you need a 8psk board and point at 129w but you can get sd channels if you repoint to 119w and 110w

[Gordito63]

Originally Posted by heman

I just bought a sonic sc8000 and downloaded the new bin hd8000 v0426p charlie update and i get some channles but now ppv chan or hd channles or the venuis channles i get some movie chan but only sound no pic ... not to sure what im doing very new to this and the dealer i bought it from didnt give me any info My setttings are sat echostar 8,x lnb single 22 khz off lnb power on transponder 12224 signal is hiogh and quallity is 80 to 92
search option all network search on diseqc off Motor enable Legacy switch off i have 2 30" bell dishes and one bell switch with 2 lnb's pointed at 91 and 82 going into that switch and leaving that switch into the another 22khz switch wich the other dish set to 110 then to reciever.
CAN ANY ONE HELP!!!

Hey Heman I see your still trying to work this out. Evil explained about the channal loss on B3V. Would you consider moving your dish to get 110/119? It might make your life easier until B3V is up again?

[heman]

yes thank you i think thats what im going to try now thanks for all your help

[Gordito63]

No problem, if you need help with your DIK setting let us know. You'll pick up lots of chans. I got 110/119/129 on a dish 1000. It receives over 1000 chans.

[heman]

I am not to sure what diseqc port iam to be on i went to the guide for idots in the help section and it says pick your sat 110w then if you have a switch pic it on diseqc and im not to sure what port i should use