new sv 8k - ABA DSS

**heman** · November 11th, 2008

i bought a sonicview sv8000 and programed usb stick and installed it on the reciever and still no channels there is a $ sign on every channel and message says its scrambled

**Gordito63** · November 11th, 2008

Did you load te latest bin. Right now there is an issue with freezing but you can still load the bin to get you started and when the new one come out alll you have to do is load the new bin. Make sure your autoroll is on and you should be able to see something. Are you pointed at DIK? And you do have the module installed. Do you have the dish 1000 (if DIK) so you can pick up 129W for HD chans?

**heman** · November 11th, 2008

i loaded the new bin and i am pointed at 110 w 91 and 82 checked my autoroll and its on still nothing is there something i am missing with the setup im not to sure..?
all channles are displaying nothing and $ still there can you help me

**Gordito63** · November 11th, 2008

OK. You are aware that some B3v chans are not working. They are being moved. Many people are losing chans. I'm pointed to 110/119. Are you at least getting the preview guide. Even if you are not up you should have something. Do this. go to the lower right button which says SAT. Once you do that you should have option to what you want to watch. Hit all sat and see what happens. If that doesn't work just go to the 10 setting and see what happens. Are you sure that all your setting are correct? What type dish do you have?Are you getting good quality?

**heman** · November 11th, 2008

i have guide and picked supr4 and i get sound no video on some channles and can get a few channels 3 so far all still have the $ there i have goood quallity on all 3 sats 91 82 and 110w do need to keepmy usb flash drive in the reciever?
AS for my settings not to sure if i got them done right or not

**Gordito63** · November 11th, 2008

When you say supra4 is that a satellite name. When you go to menu go to dish set up and do a reset. Now go o your set up and select 110 first. When you select 110 then enter your LNB type and select your TP. Try 12239 and check your S and Q. Do you have a switch of some kind. also what dish and LNB do you have. I think your setting are wrong. Let me know.

**heman** · November 11th, 2008

ok thanks will try that i got 2 belldishes a bell switch that goesto 22hz switch then to the reciever thats how the guy that i bought it from told me to hook it up. the supr4 was just the channel name now i got some channels working...
i just went to set up echostar 8 lnb single lnb freq. 11250 22 khz off lnb power on transponder 12224 i tried 12239 i lots all quallity search option all networkl search is on diseqc mini a motor disable legacy switch off

**Gordito63** · November 11th, 2008

Ok. It's sounds like we are making a litle progress. SO you do have a discq switch and you are setting each bird to a differant port. Like I said try 110 with the 12239 Tp and scan. If you still have problems let us know. Just for you information for your next post go to the top of the page in the sonicview help section and click on the left where it says "new Thread. Like that you will get help from many more people. Just make sure you include all your set up info as well as what set up you have. I'll be on line for a little while more.

dranreb1 · November 11th, 2008

very interesting post,thank you and more power to all of you...