Help!! No channels on sats!

[athars]

Hi all,

I have just updated my sv8000hd with the latest bin file V0427P and have turned off both Auto Roll and Auto TP Update. I have below settings so I am getting the 3 sats but only one sat (Echostar 3 - 61.5w) is showing me channels. Both Nimiqs are not showing me anything except for couple of the info channels. I am also not seeing all channels from Echostar 3 which includes CNN, HNN, CP24, etc. Anyone has any thoughts on what am I missing in my config of these 3 sats? Since my one dish has these 3 sats on 3 LNBs, can I get any other sats with different set of channels? I really appreciate any sort of help.

Nimiq 1,3 (144 Nimiq 1,3 91.0w)
lnb type: single
lnb frequency: 10750
22khz: off
lnb power: on
transponder: 12224
search option: all
network search: on
diseqc: Port 3
motor: disable
legacy switch: off
--------------------------
Nimiq 2 (150 Nimiq 2 82.0w)
lnb type: single
lnb frequency: 10750
22khz: off
lnb power: on
transponder: 12224
search option: all
network search: on
diseqc: Port 2
motor: disable
legacy switch: off
--------------------------
Echostar 3 (160 Echostar 3 61.5w)
lnb type: single
lnb frequency: 11250
22khz: off
lnb power: on
transponder: 12224
search option: all
network search: on
diseqc: Port 4
motor: disable
legacy switch: off
--------------------------
dtv scan option
start frequency: 473000
end frequency: 851000
step frequency: 6000

[boboisno1]

Nimiq's are gone to nag3. Nothing you or anyone can do.

[creativegenius]

Forget getting anything from B3V for the forseeable future ... that would be 91 and 82.

Creative Genius

[boboisno1]

Click on the link below for some info.

FTA News & Announcements - ABA DSS - Free to Air Satellite TV Community

[s2byus]

You may want to aim for DN 119, 110

[athars]

Thank you all for such speedy responses. I should have mentioned that I am aware of BEV out cold for now. However, my 2 questions were; why I am not seeing all channels from Echostar 3 - 61.5w (as per lyngsat site, this sat shows CNN, HNN, CP24, etc), and based on what I have setup, can I get any other satellite to view non-NAG3 channels?

[athars]

for that, do I have to physically move my dish to point to 110 and 119?

[arboristman]

your bev birds have incorrect lnb freqs too just fyi.
you need to set them to 11250 not 10750.just so you know buddy.
diseqc switch settings,only you know if they are correct.they can be anything for your standard lnbs,but they must match how you connected them outside that's all.

[athars]

Thanks arboristman. These frequencies I have for BEV are there since day 1. I had someone else setup my dish and everything as I had no clue about it. I guess I still don't... The diseqc switches are correct as they were setup just like I have stated since day 1 and no changes have been done on it.

[zekester]

CP24 is a Toronto Station it was on Bev. Not part of DishNetwork.

Originally Posted by athars

Thank you all for such speedy responses. I should have mentioned that I am aware of BEV out cold for now. However, my 2 questions were; why I am not seeing all channels from Echostar 3 - 61.5w (as per lyngsat site, this sat shows CNN, HNN, CP24, etc), and based on what I have setup, can I get any other satellite to view non-NAG3 channels?

[arboristman]

Originally Posted by athars

for that, do I have to physically move my dish to point to 110 and 119?

yes '''''''''

[bigevil69]

does the lnb that you have pointed at 61.5 have dp on the back of it

[athars]

Originally Posted by bigevil69

does the lnb that you have pointed at 61.5 have dp on the back of it

what is a dp?