ABA DSS - Free to Air Satellite TV Community - View Single Post

**wolflett** · March 29th, 2008

I would like to fine tune a dish 500 with dp plus lbn. Currently for 119 it is only getting a s of 70 and q of only 50 when using tp 12239. On 110 I am using tp 12224 and am getting s of 80 and q of 75-80. My question is when aligning sat 110 should i be using tp 12224 and sat 119 should i used tp 12239? I am concerned with the low s and q of 119 that i will start getting pixeling or loss of signal when bad weather arrives. My goal is to get a s and q of 80 or better on both sats. Any ideas or tweak suggestions would be greatly appreciated. My antenna settings are all correct just need some minor tweaking of the dish.

March 29th, 2008	#1 (permalink)
wolflett VIP Access Member Join Date: Dec 2007 Location: dark side of the moon Posts: 87 Credits: 929.70 Thanks: 59 Thanked 13 Times in 10 Posts	Dish 500 Alignment Advice Needed I would like to fine tune a dish 500 with dp plus lbn. Currently for 119 it is only getting a s of 70 and q of only 50 when using tp 12239. On 110 I am using tp 12224 and am getting s of 80 and q of 75-80. My question is when aligning sat 110 should i be using tp 12224 and sat 119 should i used tp 12239? I am concerned with the low s and q of 119 that i will start getting pixeling or loss of signal when bad weather arrives. My goal is to get a s and q of 80 or better on both sats. Any ideas or tweak suggestions would be greatly appreciated. My antenna settings are all correct just need some minor tweaking of the dish.