Bev autoroll

[JessFTA]

Is anyone else having problem with bev not autorolling? Have to enter keys every day??? Also no epg on ppv's

[carpenter1]

Originally Posted by JessFTA

Is anyone else having problem with bev not autorolling? Have to enter keys every day??? Also no epg on ppv's

Make sure you have the autoroll turned on for Bev under Options.

[JessFTA]

Carp,I cant find autoroll option in menu or anywere for Dn or Bev on the 8000HD****n you direct me there?? Dn seems to be autorolling.

[carpenter1]

Originally Posted by JessFTA

Carp,I cant find autoroll option in menu or anywere for Dn or Bev on the 8000HD****n you direct me there?? Dn seems to be autorolling.

Go to Installation and it should be there.

[gr8merm]

Should a person keep autoroll ON as I've heard horror stories of what can happen if you do.

[JessFTA]

Carp, its just not there! do you have one of these units to actualy see if it is in the installation. Is there a sub-menu under installation where it is at? I went through everything and can't find it. On my CS6000, I know where it is under installation, but not on this 8000.

[carpenter1]

As per request, here is the info

How to program your Coolsat 8000HD

Step 1

• Download the current loader - CSUpgrade_v3.01.zip
• Download the - CS8000HD-11153A.zip
• Download the latest file -CS8000HD_11154F.zip
• Download KeyUpdate V8.2.7 (KEYS section)
• Downloand CS8000 Key Loader V1.zip

Unzip all your files into a folder where you can locate them.

Step 2

• Run the loader and find file 11153a.sgn – Note here, older stbs use BIN files, 8000 uses SGN, you can change the option to SGN in the loader.

(MODE = Download, TYPE = Firmware, channels)

• Make sure that you are connected to the right come port.
• Turn on STB and when you see LD flashing in screen – PRESS START

Once that is finished, turn off STB and repeat steps to load the current file.
(It is my understanding that you do not need to re-flash 11153a file in the event of an upgrade to the SGN file).

Step 3

• Run the Key update program – if you experience problems with missing ocx files, go back to the KEYS section and follow the instruction on how to add the necessary files (KeyUpdate-Dealing with Missing OCX or DLL errors)
• After running this program, you will find the active keys on the bottom of the page. Close the page and you will be prompted to save the file – say yes. It will create a file called KEYS.KEY (you will need this for step 4)

Step 4

• Open your key loader program, select the com port, press connect
• Click on DOWNLOAD, you should be prompted to select the file that you want (Keys.key)
• Turn on stb and let file load – HINT, this file loads fast, so don’t panic if you don’t see a progress report and it happens to just say done.

Now the fun stuff – Connect the CS and set up your sats and switches and DiSEqC and scan the sats for the channels.
Press MENU, go to ADVANCED MENU, press 1 2 3 4, go to NAGRAVISION, what ever sats you are looking for the keys should be there..
DN 000001 – 00 – keys
DN 000001 – 10 – keys
DN 000101 – 00 – keys
DN 00101 – 00 – keys

BV – 000801 – 00 – keys
BV – 000801 – 10 – keys
BV – 000801 – 01 – keys
BV – 000801 – 11 – keys

BV takes more time to autoroll the keys
Have a great day

[JessFTA]

Carp, thanks for all this helpfull Info. and all youir hard work. It is greatly appreciated, I will give this a try, thanks again.

[rlc2day]

Originally Posted by carpenter1

As per request, here is the info

How to program your Coolsat 8000HD

Step 1

• Download the current loader - CSUpgrade_v3.01.zip
• Download the - CS8000HD-11153A.zip
• Download the latest file -CS8000HD_11154F.zip
• Download KeyUpdate V8.2.7 (KEYS section)
• Downloand CS8000 Key Loader V1.zip

Unzip all your files into a folder where you can locate them.

Step 2

• Run the loader and find file 11153a.sgn – Note here, older stbs use BIN files, 8000 uses SGN, you can change the option to SGN in the loader.

(MODE = Download, TYPE = Firmware, channels)

• Make sure that you are connected to the right come port.
• Turn on STB and when you see LD flashing in screen – PRESS START

Once that is finished, turn off STB and repeat steps to load the current file.
(It is my understanding that you do not need to re-flash 11153a file in the event of an upgrade to the SGN file).

Step 3

• Run the Key update program – if you experience problems with missing ocx files, go back to the KEYS section and follow the instruction on how to add the necessary files (KeyUpdate-Dealing with Missing OCX or DLL errors)
• After running this program, you will find the active keys on the bottom of the page. Close the page and you will be prompted to save the file – say yes. It will create a file called KEYS.KEY (you will need this for step 4)

Step 4

• Open your key loader program, select the com port, press connect
• Click on DOWNLOAD, you should be prompted to select the file that you want (Keys.key)
• Turn on stb and let file load – HINT, this file loads fast, so don’t panic if you don’t see a progress report and it happens to just say done.

Now the fun stuff – Connect the CS and set up your sats and switches and DiSEqC and scan the sats for the channels.
Press MENU, go to ADVANCED MENU, press 1 2 3 4, go to NAGRAVISION, what ever sats you are looking for the keys should be there..
DN 000001 – 00 – keys
DN 000001 – 10 – keys
DN 000101 – 00 – keys
DN 00101 – 00 – keys

BV – 000801 – 00 – keys
BV – 000801 – 10 – keys
BV – 000801 – 01 – keys
BV – 000801 – 11 – keys

BV takes more time to autoroll the keys
Have a great day

This is a very good post. Very to the point and clear.