settings ?

[Mighty Thor]

have a magnum and 500 dish w/1000 DP plus LNB. loaded v150 only as per PDF v140and_higher. Was getting echo 8-10 (Q79 S78) with these settings:

LNB: DP_14350 11250
LNB power: on
DISEqC: v1.0 (what is DISEqC) ?
DISEqC port: off
22KHz Tone: auto
Muli-D sw: off (what is this switch) ?

but couldnt get echo 7 (Q0 S78) with same settings.
are these settings correct ?
Also ? of Skew DTV vid. said on one skew per zip but sat finder page i found here has dif skews for 119 & 110?

thanks for any help
Thor

[carpenter1]

You need to put 119 on Diseqc 1.0 to port 1 and 110 to port 2.

[Mighty Thor]

Think I lost 110 due to cloud cover, because shortly after post 119 started coming in. so all other settings ok ? changed settings, still getting both.
thanks again Carp

[carpenter1]

So are you getting everything now?

[Mighty Thor]

I really dont know what everything is but when i go to sat list:
dishN package populates (whats this)
bell package doesnt
echo 7 does
echo 8_10 does

Is there any oder to stations as with DTV

[carpenter1]

You need to go into Options in your menu and turn ON Sort By Sid to get them in order and if you don't have another dish pointing to 91 and 82 then you have them all 119 and 110.

[Mighty Thor]

Im in Additional Options
SID Mode is ON
SID SORT is ON (Is This it)?
BellVu Renumbering 1000
auto Roll is on

[carpenter1]

If you don't have Bev then you don't need to do anything with it but the sid's are right.