HERE YOU GO BUDDY!
ExtremeView Magnum:
Make sure that you have a current
BIN file loaded.
1. Press the menu key on your remote
2. Go to "[$]" and press the "OK" button
3. Go down to SoftCam, and press the "OK" button
4. Set the Menu screen to look like this:
CAS : NAGRA
Provider name: Dish-Net
Provider ID should be on 00 02
5. Go down to "00" set Keycodes and press the "OK" button A softcam key edit window will open.
6. The first half of the first key "00" will be highlighted, press the "OK" button
7. A Key Pad Window will open, just scroll around to enter your new keys
(Using Up, Down, Left and Right keys)
8. Press OK on the Keypad window, then when window closes press update (green
button on remote)
9. Wait for keycode to update. (if you don't you will have to do it all over again)
10. Now go down and repeat steps for the next half of your new keycode you are
changing.
11. Go down to the "01" or second set of Keys for Dish-Net and do steps 6-10 for 01.
12. Once you've finished the DN Keys you can go to the BellExpressVu keys
13. Go up to the Provider Name
14. Go to the right one time to Bell-Vu.
15. Now repeat the steps above to change your
BEV keys.
Be sure to press the "green" button to update your keys and wait after entering your new keys!
If you mess up and need to start over, you can go back to default the keys, by pressing the
Blue default button on your remote.
Linear Mode
