|
Initial Steps to revive Dead box:
c/p
Initial Steps to revive Dead box:
1) Shut off receiver.
2) Unplug receiver.
3) Take receiver to computer.
4) Plug RS232 Null Cable to computer via serial port.
5) Plug other end of RS232 Null cable to serial port on receiver.
6) Make sure you have SP6000Production bin and loader1.9.3
7) Ensure files are unzipped.
8) Start loader program.
9) Click Load and select the unzipped bin (SP6000-Production)
10) Ensure cable and port are the same and click Connect.
11) Plug in receiver.
12) Turn receiver switch to ON.
13) Let it load. and you should be back up.
14) Start all over, but change step number 9 to the most recent bin.
Thanks to multiple people
|
Linear Mode
