Quote:
Originally Posted by many110
I am a little confused and am wandering what is that best dish/comfiguration to use with the skywalker tuner? I have a friend who tried to hook his DVB card to a 1000 (with 1 single and a dual dp plus, lnbs) and he did not have any luck with thatconfiguration at all. He could not get a signal on his cw3000, but he hooked up another reciever to that and he was able to get all channels. So my question is, could the cw3000 (w/skywalker) accept a dp34 or dp44 switch or could it only accept a DISEq switch? Thank you.  |
the dish 1000 and the 1000.2 are power hogs but with one line running to your receiver you should not any problem as long as you are using rg6 and it is less than 100' of cable i would check your cable connectors you might have a bad connection. you can use the dp34/44 if you are using more than 1 receiver. good luck and have fun