Quote:
Originally Posted by sly
the dish 1000 and the 1000.2 are power hogs but with one line running to your receiver you should not any problem as long as you are using rg6 and it is less than 100' of cable i would check your cable connectors you might have a bad connection. you can use the dp34/44 if you are using more than 1 receiver. good luck and have fun
|
Do you run the 3k? I dont think so from your answer. This is a computer with DVB cards there it not nearly enoff power from the 3k to run a DP plus LNB. Only a powerd switch will work with the DPs!