View Single Post
Old May 5th, 2008   #3 (permalink)
joe84
FTA Newbie
 
joe84's Avatar
 
Join Date: Jan 2008
Posts: 48
Thanks: 38
Thanked 17 Times in 11 Posts
Rep Power: 0 joe84 is on a distinguished road
Re: Cw600pv1.82 - Feedback

I loaded 1.82 and the updated long channel names, now the patch will not enable or disable. I press f1 then 000 and it doesn't do anything. Plus when I goto Menu - Installation - Antenna Settings and scan through the sats my cs6000 changes channel on it's own. I don't mean scan for channels, it does it just if I change sats at the very top like say if it's on 119w and I keep pressing left my coolsat will change channels. My settings are:

SATELLITE............119w
LNB TYPE.............OCS-DP
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12239
DISEqC1.0..............LNB1
MOTOR..................Off
LEGACY SW..........None

SATELLITE............110w
LNB TYPE.............OCS-DP
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12224
DISEqC1.0..............LNB2
MOTOR..................Off
LEGACY SW..........None

SATELLITE............91w
LNB TYPE.............OCS-DP
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12224
DISEqC1.0..............LNB3
MOTOR..................Off
LEGACY SW..........None

Any ideas?
joe84 is offline   Reply With Quote