ABA DSS - Free to Air Satellite TV Community - View Single Post

dude120 · May 5th, 2008

I found this on another site, and take no credit, to whoever figured this out thanks
Follow these instructions to a "T" and it will work..(tested on my 7000)

C/P

This Fix's previous problems of 2 hour EPG on cs7000 & others

Scanning B3V TP 12224 is where the breakdown occurs.
Once this TP is scanned, it prevents DN EPG data beyond 2 hours.

This is how I've been working around this problem lately to get 3 days on each provider.
**Using a CS7000PVR, but I've been informed that this works for CS.6100/7000/7100/8000/8100 and the Visionsat line of products supported by NoRW.

1. Factory Default.
2. Enter your LNB/Switch settings.
3. Auto Scan 110 and 119 with Network Search 'ON'.
4. Delete TP 12224 from 91.0W B3V TP list.
5. Auto Scan 91.0W with Network Search 'OFF'.
6. Re-Add TP 12224 to 91.0W B3V TP list, and set Network Search 'ON' - DO NOT SCAN B3V TP 12224.
7. Ensure your setting for Auto CH/TP update is 'ON', eventually the channels from B3V TP 12224 will populate in your channel list without buggering the DN EPG functionality.

** I have seen some instances where this process does not add the Yellow B3V EPG button to the OSD, Auto Scan of 82.0W corrects this issue without buggering DN EPG functionality.

Then you use GrassHopper's (super mod) Instructions as follows

C/P (from grasshoppers original post)

How To Populate Epg For Coolsat 7000 PVR Go to channel 239 and hit the EPG button on your remote. You should see the Echo EPG item with the Blue circle next to it. Go ahead and hit the blue button on your remote and the Extended EPG popup should stay on the screen while the EPG is being populated. Warning, if it pops up and goes away right immediately… then you screwed something up. If it stays and populates out to 9 days, Congratulations!

.

May 5th, 2008	#35 (permalink)
dude120 FTA Newbie Join Date: Dec 2007 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 0	Tested Working Fix for EPG Problems on CS7000, Hooray ! I found this on another site, and take no credit, to whoever figured this out thanks Follow these instructions to a "T" and it will work..(tested on my 7000) C/P This Fix's previous problems of 2 hour EPG on cs7000 & others Scanning B3V TP 12224 is where the breakdown occurs. Once this TP is scanned, it prevents DN EPG data beyond 2 hours. This is how I've been working around this problem lately to get 3 days on each provider. Using a CS7000PVR, but I've been informed that this works for CS.6100/7000/7100/8000/8100 and the Visionsat line of products supported by NoRW. 1. Factory Default. 2. Enter your LNB/Switch settings. 3. Auto Scan 110 and 119 with Network Search 'ON'. 4. Delete TP 12224 from 91.0W B3V TP list. 5. Auto Scan 91.0W with Network Search 'OFF'. 6. Re-Add TP 12224 to 91.0W B3V TP list, and set Network Search 'ON' - DO NOT SCAN B3V TP 12224. 7. Ensure your setting for Auto CH/TP update is 'ON', eventually the channels from B3V TP 12224 will populate in your channel list without buggering the DN EPG functionality. I have seen some instances where this process does not add the Yellow B3V EPG button to the OSD, Auto Scan of 82.0W corrects this issue without buggering DN EPG functionality. Then you use GrassHopper's (super mod) Instructions as follows C/P (from grasshoppers original post) How To Populate Epg For Coolsat 7000 PVR Go to channel 239 and hit the EPG button on your remote. You should see the Echo EPG item with the Blue circle next to it. Go ahead and hit the blue button on your remote and the Extended EPG popup should stay on the screen while the EPG is being populated. Warning, if it pops up and goes away right immediately… then you screwed something up. If it stays and populates out to 9 days, Congratulations! .