Thread: How to Load FILES AND SET -UP VS
View Single Post
Old August 13th, 2006   #1 (permalink)
grasshopper
Retired Mod
 
grasshopper's Avatar
 
Join Date: Apr 2005
Location: Far Far Away
Posts: 6,049
Credits: 37,433.25
Thanks: 429
Thanked 9,645 Times in 1,635 Posts
How to Load FILES AND SET -UP VS
1 Make sure VS is turned off by back switch
2 Connect a NULL MODEM cable between the ViewSat and your PC.
3 Open "Loader2
4 Click "Open Files"
4 Browse to directory holding “ViewsatUSA_.PGM” file , Click on "ViewsatUSA_.pgm files ", Click "OPEN"
6 Click PC-->STB on your computer screen; then Power “ON” your ViewSat by ON/OFF switch . You should see the File loading properly.

WARNING: DO NOT POWER VIEWSAT OFF UNTIL TOLD!

When file transfer is completed, the Front Panel will display:
"inst" for 15 seconds while the software is being installed
"DONE" for 10 seconds while the ViewSat does housekeeping chores
Next, the ViewSat automatically REBOOTs
" on " will be displayed and when the reboot is complete, "0000"
You may NOW turn "OFF" the ViewSat and connect it to your TV and satellite dish cable.


the attached file will walk you through step by step + pics.
Last edited by grasshopper; December 23rd, 2006 at 01:25 AM.
grasshopper is offline  
The Following 17 Users Say Thank You to grasshopper For This Useful Post:
dekookie (March 5th, 2007), denise8934 (February 7th, 2008), desire (February 11th, 2008), Envy@fake.com (March 7th, 2009), hfajardoe1 (January 18th, 2008), hunny9210 (August 14th, 2008), jynx906 (June 2nd, 2008), KAB-1 (July 22nd, 2008), Lancer68 (December 27th, 2007), Maurto (November 7th, 2007), ordnas (March 2nd, 2008), oscar007 (May 27th, 2007), payton (June 29th, 2008), Rafy666 (November 24th, 2007), rajput11 (October 24th, 2007), wgibbsb (November 19th, 2007), wiwiv (August 31st, 2007)