Quote:
Originally Posted by tnp12
check your settings you guys, they should look like this:
antenna settings
press menu- installation- pin code- antenna setup
sattelite echostar 7 (for example)
lnb power - on
lnb type - universal ( some may use standard)
lnb high - 11250
lnb low - 9750
tp freq - 12224
diseqc 1.0 - port (depends on where the cables are on the switch. use none if you only have one dish and lnb)
motor - off
legacy sw - none
|
tnp every thing looks good except for the tp should be 12239 for echo 7 (119). would you concure?