ABA DSS - Free to Air Satellite TV Community - View Single Post - Steps to make your coolsat ready with card

**tango** · August 15th, 2006

IF you have an iso programmer.
-Do a simple ATR reset in NagraEdit4.1
If you don't (disconnect your sat signal from your ird)
-Pop the card into your ird and pull it out when you see the receiver turn on, it will goto the sysinfo screen and you can see by the DNASPXXX and the REVXXX.
Both simple and easy way to find out and neither will screw the cards.

August 15th, 2006	#28 (permalink)
tango Veteran Abadss Member Join Date: Jul 2006 Location: In the net Posts: 1,330 Thanks: 28 Thanked 196 Times in 156 Posts Rep Power: 4	Find out IF you have an iso programmer. -Do a simple ATR reset in NagraEdit4.1 If you don't (disconnect your sat signal from your ird) -Pop the card into your ird and pull it out when you see the receiver turn on, it will goto the sysinfo screen and you can see by the DNASPXXX and the REVXXX. Both simple and easy way to find out and neither will screw the cards.