ABA DSS - Free to Air Satellite TV Community - View Single Post

hawke12 · May 13th, 2008

I am currently using a dish500 with a DP plus LNB, pinted at 110w/119w, and a pansat 2700a(real). I have a second dish, with a DP single LNB. I'm not sure where it's pointed, the Dish guy said it was for the HD channels because the "HD" sat wasn't a strong enough signal because of a tree, so he put this second dish up which you can plainly see is pointed in a different direction. anyways, the second dish is not connected anymore, I disconnected it from the Dish500 when I first setup my Panny.

Now I would like suggestions on what to do with this dish, and If I just need to reconnect it to the fourth F-type on the Dish500 LNB like it was Originally or connect it through a switch.

I hope this makes sense, thanks.

May 13th, 2008	#1 (permalink)
hawke12 FTA Newbie Join Date: Apr 2008 Posts: 39 Thanks: 6 Thanked 2 Times in 2 Posts Rep Power: 0	Second dish, what to do? I am currently using a dish500 with a DP plus LNB, pinted at 110w/119w, and a pansat 2700a(real). I have a second dish, with a DP single LNB. I'm not sure where it's pointed, the Dish guy said it was for the HD channels because the "HD" sat wasn't a strong enough signal because of a tree, so he put this second dish up which you can plainly see is pointed in a different direction. anyways, the second dish is not connected anymore, I disconnected it from the Dish500 when I first setup my Panny. Now I would like suggestions on what to do with this dish, and If I just need to reconnect it to the fourth F-type on the Dish500 LNB like it was Originally or connect it through a switch. I hope this makes sense, thanks.