Thread: how to clone 2 viewsats
View Single Post
Old August 24th, 2006   #1 (permalink)
carpenter1
Super Moderator
 
carpenter1's Avatar
 

Join Date: Jan 2005
Location: On the computer
Posts: 6,225
Credits: 7,812.85
Thanks: 303
Thanked 2,590 Times in 914 Posts
how to clone 2 viewsats
For use in cloning one ViewSat to another.

a. Connect the "Master" ViewSat to your TV; Power switch "ON"

b. Connect the "Clone" to the wall power; switch Power "OFF"

c. Connect the "Master" and "Clone" ViewSats using a NULL MODEM cable

d. MENU--INSTALLATION--RECEIVER UPGRADE--ALL INFORMATION

e. "OK" and the "MASTER" ViewSat sets up to send data to the "Clone" ViewSat

f. Turn the "Clone" ViewSat's power switch to "ON" and the transfer begins

NOTE: AFter the transfer is completed, the "Clone" ViewSat needs up to 1 minute to process the transferred data.

Watch the Front Panel on the "Clone" ViewSat.
"inst" will be displayed for ~ 15 seconds

"DONE" will be displayed for ~ 10 seconds

REBOOT will occur automatically without user intervention " on " will be displayed during reboot

"0 0 0 0" will show when the "Clone" has finished--no more than 1 minute after data transfer

You may now Power "OFF" the "Clone" ViewSat, disconnect the NULL MODEM cable and go use your new Clone ViewSat
__________________
carpenter1 is offline  
The Following 9 Users Say Thank You to carpenter1 For This Useful Post:
ahuandara (December 5th, 2007), gricken (December 25th, 2007), hawgnuttz (December 21st, 2007), MAOR (March 21st, 2008), ozzi (December 13th, 2007), purposemultiall (March 1st, 2008), RLPSR69 (December 21st, 2007), satnam (December 4th, 2007), semtrack (February 21st, 2008)