|
Carp;
This is my current config on dish and cabling.
///////////////////////null spacing///////////////////////|----- 119
----To receiver-------RG6 coax------------DISHPRO|
//////////////////////null spacing////////////////////////|----- 110
-----To receiver--------RG6 coax----Single LNB Dish|-----61.5
when I put both cables on any switch...I lose one of the Pro's LNB's. I thought my DP34 was going to do the trick but couldn't get it to work with the Pansat 2500.
Now your saying to connect my DP21 SW were?
and use the DP34 SW before DP21 SW
Also My dish is so high off the ground that it is impossible for the time being to connect or replace dish(s) with motor and legacy dish. I have to shoot high over treeline ....I'm practicly in the jungle as it is.
Lets take it on dish at a time so I understand this. how do I get just the Dishpro twin (110 & 119) (one cable coming out of the dish to the receiver) to configure to the VS Extreme? I get that up and running then I'll experiment from there..........
Thanks!
Ren
|