oh ok.thats much diff than a dpp lnb.
ok,yup run a straight line into tuner one.and setup and sat scan:
tuner 1:
119/echo 7:
LNB type: ocp-dp
LNB frequency: 11250
22khz.: off
LNB power: on
transponder : 12239
search options: all
network search: on
Diseqc : port 1
motor: disable
legacy switch: off
110/echo 8,x:
LNB type: ocp-dp
LNB frequency: 11250
22khz.: off
LNB power: on
transponder : 12224
search options: all
network search: on
Diseqc : port 2
motor: disable
legacy switch: off
and that's it.
i dont think twins/quads work with dpp separators.-well yeah i guess they wouldn't or they wouldn't call them dpp
lol.the dpp carries signals diff.
im going to finally have to read up on my dish pro lnbs better.
so you can swap it with a dpp lnb and add a dpp separator.then you could keep just one line for both tuners.(like in the sticky)
or you can just run another line from your quad into tuner 2.-cheaper than swapping lnbs.
then you would set tuner 2 the same way.
but no setting nimiq 1 since your not pointed there.