[arboristman]

advanced info about dish pro plus technology.

a c/p when i found,so not sure of original author,but thank you whoever you are sir:


DishPro Plus makes it possible to hook up a dual tuner receiver with just a single run of RG6. As explained above, DishPro LNBs stack the even transponders to a higher frequency range, then a DishPro switch sends all the transponders from one satellite to the receiver.
DishPro Plus puts a new twist on that by being able to control which transponders from which satellite are translated into the low and high range. For instance, the switch can be directed to translate even transponders from 119° to the low range for tuner 1 and odd transponders from 110° to the high range then put them on the same receiver output. Each range is directed to one of the dual tuner receiver's inputs by a DP Plus Separator installed at the back of the receiver. While often thought of as a splitter because of its appearance, the DPP Separator is actually a diplexer. A DPP Separator is included in the packaging.





c/p talking about sonicview being the FIRST and currently ONLY fta receiver in the market to support dpp separator/full dpp technology:

The Sonicview crew known for " no promises but deliver ", and it been all good since day one with how they showing their supports. This showing Team Sonicview monitor closely to every single feedback, and quickly react to it.



note,there is much more you can do with dpp44 switches as well.
but for more in depth details of all this,please seek the fta accessories section of the forum.