How to enter keys manually for Coolsat

[grasshopper]

Here's how to manually Load Keys for the Coolsats:

On your remote control,
Press 8282, this will bring up the Key Edit menu. The #1 box at the top should say Nagravision. If box #1 does not say Nagravision, you may need to scroll to box #72 using the right or left arrow buttons on your remote. The CAS should read Nagravision. The Ident should read Dish Network (0001), below that, there should be 4 boxes on the left that have 10, 11, 20, 21 in them with numbers and letters to the right of those numbers. This is where the current key data is located and may need to be changed manually from time to time. Autoroll files normally make these steps unnecessary but the occasional unforseen circumstances make changing the data necessary but easy to do.

UPDATED INSTRUCTIONS/INFO:
Press the down arrow button to highlight whichever is the Current Active Key(s) which will be either
10 or 11 = Key 00 Data / 20 or 21 = Key 01 Data or both as determined by the Key gathering program you are using such as CyberDBS, KeyMaster, Get Keys, Jeepers, Maestra etc.,

[duckman610]

not sure how to low the key i've tried and still missing alot of channels

[grasshopper]

Use bin 135, It's still working. A lot of channel moved around, You have to scan it back

[mushyman99]

What are the new keys for coolsat 5000 thnks

[grasshopper]

PLease go here for new keys everytime
http://www.abadss.com/forum/new-keys/
http://www.abadss.com/forum/keys-discussion/

[edwinsao]

very good grass but is better if you put as sticky

[videobruce]

There are 16 pairs and the menu only has 8 pairs on each line.

[grasshopper]

Originally Posted by videobruce

There are 16 pairs and the menu only has 8 pairs on each line.

Key 0 = line 10 & 11
Key 1 = line 20 & 21

[videobruce]

Thanks, but would of been nice if the first post would say this.
That isn't the only place where the instructions are wrong.

[edwinsao]

Originally Posted by videobruce

Thanks, but would of been nice if the first post would say this.
That isn't the only place where the instructions are wrong.

k my friend the key
key00:XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 16 PAIRS right
you will put the first 8 pairs in the line beside the #10
10:XX XX XX XX XX XX XX XX
and the others 8 pairs in the line #11
11:XX XX XX XX XX XX XX XX
now the key 01
KEY 01:XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 16 pairs
you will put the first 8 pairs in the line #20
20:XX XX XX XX XX XX XX XX
and the others 8 pairs in the line #21
21:XX XX XX XX XX XX XX XX
if you put the right keys but some channels are missing just do an auto or blind scan

[videobruce]

I understood the previous post. The point I was making the OPs' post didn't say this and misinformation is elsewhere.

[MATT2]

Hi,
Did any one know how to down load 121 international channel to coolsat 5000? please help.

Thanks,

[appsay]

hi every one