How to Properly Load NorW Bins

[tomcat01]

factory bin link

http://www.abadss.com/forum/coolsat-...ory-flash.html

newest bin

http://www.abadss.com/forum/coolsat-...22-2006-a.html

[SatelliteJunkie]

Originally Posted by Christopheris

coolsat 5000 premiem.....I have unzipped the loader...but I don't know how to do all everything...very confused and frustrated

Relax...take a deep breath...it will be OK.
Now read my CoolSat Setup Instructions & follow along as you do it.
If you need help to use loader...go download KEYGRABBER & in there you will find the best guide w/ photos on how to use it...easy!

http://www.abadss.com/forum/coolsat-...22-2006-a.html

[tomcat01]

here is a step by step not sure if it is here but download this unzip and read..

[rustyshakalfurd]

Originally Posted by grasshopper

1. First do a Factory Reset !! [Menu-System Settings-Database Reset-Factory Set]
2. Load Factory Flash !
3. Load the 137 bin Or the Latest bin
4. Do another Factory Reset !
5. Setup your dish settings & motor settings
6. Setup your options [Renumbering Local Channels is a new option]
7. Auto Scan sats. start with 119 (turning off network search will speed up 110 scan)
8. Set Time Settings and Channel Locks, Exit and Watch TV

**NOTE** Remember to always turn your coolsat off by the switch on the back of the unit before you disconnect or connect the coax cable or you may damage the stb.

grasshopper considering that i have already loaded the new bin 140 can i just do a factory flash then factory reset to get all the ppv chan or does that delete everything including the new bin? RUSTY

[carpenter1]

Originally Posted by rustyshakalfurd

grasshopper considering that i have already loaded the new bin 140 can i just do a factory flash then factory reset to get all the ppv chan or does that delete everything including the new bin? RUSTY

It will delete everything if you do a Database Reset and then load a factory bin file and then the 140 and then do a Database Reset again.

This is the right way to clean out the receiver and load the new bin

[baby]

thank you for your help

[grasshopper]

Originally Posted by baby

thank you for your help

no problem. Feel free to ask us any questions

[WenZong]

When in doubt, use Google.
I'm following the guide right now..
even though no1 has posted here for 'bout 6-8 months or so.. wow...

[gquinn1]

why does my loader say wrong format and not load the new bin file for 8000 HD

[Ed315]

good afternoon,
where do i fine Factory Flash for my cs6000?

[SatelliteJunkie]

Originally Posted by Ed315

good afternoon,
where do i fine Factory Flash for my cs6000?

Here you go buddy...sorry it took so long. >>>

http://www.abadss.com/forum/117-cool...ory-flash.html