what to do? - ABA DSS

**marvinlee1** · April 10th, 2009

What all will i have to do to set-up my coolsat & or dish to get the fta channels?Do we have a thread i can go to?

**snakebite** · April 10th, 2009

go to dishpointer .com and check out the size of dish you will need ,and check out lngsat to see programs available,i was just checking it out myself.

road dog · April 10th, 2009

Quote:

Originally Posted by marvinlee1

What all will i have to do to set-up my coolsat & or dish to get the fta channels?Do we have a thread i can go to?

First of all get you coolsat box setup, then find 119 and 110 satellites with your TV.And the:

Coolsat - It's this simple.

--------------------------------------------------------------------------------

If you like it simple, here it is....Just follow the bouncing ball...Don't do any thinking, just follow the bouncing ball. Takes less than 1 hour, so you can do it over lunch.

Coolsat 4000 – Flashing Procedures

Items Needed:

1 - RS232 Cable
1 - Current Coolsat 4000 134p 20050915.stb bin file
1 - Coolsat Pro Loader v2.2 software
1 – Channels list file – Example…Working5.2_Legacy CoolSat.ndf

Flashing The Coolsat BIN:

1. Turn power OFF on Coolsat with the front button or with remote.

2. Turn OFF rear power switch before making any connections.

3. Unplug the receiver.

4. With all power OFF.

5. Connect RS232 cable from Coolsat to PC.

6. Plug IN receiver.

7. Open the Coolsat Pro Loader v2.2 software.

8. Turn ON the REAR reset switch on back of the Coolsat. Do not turn ON front power button.

9. Browse and find your Coolsat4000_134p_20050915.stb bin file (or current
bin file) in the Open window. Select the Coolsat4000_134p file, then click Open.

10. Click Auto Detect to see if port setting is correct and your Coolsat is detected. If port setting is correct, the Comm Port and current bin version loaded to the receiver will show. If you are not able to connect to Coolsat, Turn the rear power switch OFF and back ON.

11. Click Exit to exit the Auto Detect.

12. Click Connect, another window will open

13. Click Start.
You will see System Reset, Sending %’s, Sending Ok and Erasing the bin. Do not interrupt until the Finish window opens. The Finish window will show the prior version of bin loaded.

14. Click Finish.

15. Click Auto Detect
Current version bin loaded will appear.

flexpress · May 7th, 2009

hi i have an old 4000 and i changed pc's an lost my loader can anyone direct me to a link with a loader thanks