Quote:
Originally Posted by Dim_Bos
I have a Dishpro 500 with 2 lnbs, could scan Echostar7,9,8X and 1,2 but when I point to 3 (61.5) and run a blind scan catches all channels from either Echostar 7 or 8X.
|
Quote:
Originally Posted by Dim_Bos
What do i need to set my freq's other config to get INdian channels ?
|
If you really are aimed at 61.5W, you cannot get any channels from ES 7 or 8. If you are aimed at 110-119W, you cannot get any channels from ES3 61.5W or ES1,2 148W. It is possible to get misleading results by selecting the wrong satellite in the Installation Menu while the dish is aimed at the wrong sat.
Indian channels are on 61.5, 118.75 and 148. The sat at 118.75W AnikF3 will require a 30" dish with a special dual-band circular LNB (eg. CB2008a).