ABA DSS - Free to Air Satellite TV Community - View Single Post

**Gordito63** · September 3rd, 2008

Well guys,
I was getting ready to get a switch but decided to try it per Woodcreaker and Tom's advice. I don't know if I still need a switch. I recalibrated my dish. The setting from sat caluator was 4-5 degrees off on the elevation and azu. I used port 2 and found 7 which was the sat I was having problems with. After fine tuning on 7 I then skewed to find 8 and 129'. It's working great on all my stb 1 8000hd,visionsat 200 and a vs plat 200. I don't know wht the switch is for but so far so good. So as of now I guess a switch is not needed.

September 3rd, 2008	#10 (permalink)
Gordito63 VIP Access Member Join Date: Jul 2006 Posts: 622 Credits: 1,417.65 Thanks: 77 Thanked 105 Times in 91 Posts	Re: How to setup your Dish1000.2 Well guys, I was getting ready to get a switch but decided to try it per Woodcreaker and Tom's advice. I don't know if I still need a switch. I recalibrated my dish. The setting from sat caluator was 4-5 degrees off on the elevation and azu. I used port 2 and found 7 which was the sat I was having problems with. After fine tuning on 7 I then skewed to find 8 and 129'. It's working great on all my stb 1 8000hd,visionsat 200 and a vs plat 200. I don't know wht the switch is for but so far so good. So as of now I guess a switch is not needed.