How to Use Coolsat Loader & Channel Editor

[grasshopper]

How To Program Coolsat 7000 With RS232 Cable

1 – Download and unzip both loader & latest bin files (Coolsat7000NorW_v106 or latest)
2 – Power OFF your unit from the back switch
3 - Use Straight Serial Cable RS232 to connect your PC and receiver
4 – Open your Coolsat Loader. Click Mode and choose Softwares, Channels or Keys
5 – hit Download then Turn the power ON
6 – Now setup your Dish Setting and Auto scan your Selected Sats

Warning: Do not disconnect cable or power off your receiver. Wait until it finishes and reboot itself.





How To Save Channel List To Your PC:

1 – Open Coolsat Loader. Click Mode and choose Channels
2 – Check To Computer. Click File, Save in…
3 – Click Upload and wait until it finishes and reboot itself



How To Use Coolsat’s Channel Editor:

1 – Open Coolsat7000-Editor
2 – Click File or Yellow Folder icon to locate the Channel List that you saved it to your PC
3 – Look for file with .fdu and double clicks on it
4 – Now all you need to do is high light and right click on Sats, Transponder, TV or Radio and Choose either Add, Edit or Delete…






Best deals on the net Coolsat | Viewsat | Sonicview

Download PDF file below