How To Recover From The E-01 Error - ABA DSS

**grasshopper** · December 25th, 2007

To Recover from the dreaded E-01 ERROR simply follow my RS232 loading instructions But REPEAT step 4 and 5 Twice BEFORE moving on to step 6

NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !

1) Download and unzip both the ( COOLSAT7000_FAC_V0111 ) and NorW latest release

2) Connect your receiver to your computer using your RS232 cable.

3) Open your Coolsat 7000 Loader click the file button and load your Coolsat_7000_Fac_Vo111 into your loader

4) Timing is everything on this step ! Put your mouse over the download button and as soon as you turn the Back power switch on your receiver ON click the download button
If your to slow it will NOT load and you must Repeat this step !

5)When your receiver reboots itself Or you see this ---- turn off the back switch and reconnect it to your TV then click Menu on your remote and then go to Installation screen and select SYSTEM RECOVERY and click YES to (System restore to Factory Default) when the factory reset is finished set the Language of choice and then set your time zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say NO at this time !

6)Now Repeat the First 5 steps to load the Latest Coolsat7000_NorW-bin !
BUT this time say YES to Auto Detect and it will auto set your LNB type and switch settings and then scan All the satellites your pointed at !

NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !

**canning** · January 4th, 2008

The damage that can be caused by unplugging your receiver before disconnecting the power. What will be the symptoms?

I can't even get a picture when my receiver is attached to my TV.

Thanks so much.

aocoolsat · January 4th, 2008

Quote:

Originally Posted by canning

The damage that can be caused by unplugging your receiver before disconnecting the power. What will be the symptoms?

I can't even get a picture when my receiver is attached to my TV.

Thanks so much.

Usualy the damage that can happen is to blow, your diseq switch, happened to me, but if you are not using the switch it probobly may damage the receiver, I am not sure, it did not happen to me so far, and I hope it never will.

**payneless** · February 5th, 2008

Where do I get a good loader? the one in here seems to have a trojan virus.

Bartsch · June 9th, 2008

Grasshopper, I would like to know what causes the dreaded E-01 Error problem, would you tell me please? What can I do to prevent it in the future?
I have owned my CS7000 now for nearly a year and for the first time - the 'E-01 error' just happened to me... of course my unit was short this RS-232C communications cord but I will buy tomorrow and try your solution.

Thanks

monodex55 · June 9th, 2008

[quote=grasshopper;207721]
4) Timing is everything on this step ! Put your mouse over the download button and as soon as you turn the Back power switch on your receiver ON click the download button
If your to slow it will NOT load and you must Repeat this step !

I've found you don't need to perform the "timing is everything" step. Leave the CS7000 switched off. On your computer click the download button to load the factory bin. Your computer will tell you it cannot download the bin. Now switch on the CS7000 and the download will start.

Found this out by accident, trying to download the factory bin but having forgotten to switch on my CS7000.

Metric · July 29th, 2008

I can't get it to work, the status of the loader instantly goes to "Waiting for request. Reset SetTop Box" , I've tried clicking download as soon as I turn the box on and before I turn the box on. And I've tried using older factory files as well, nothing so far

ruzroy33 · July 29th, 2008

Still have scrambling and freezing on BEV w 171

**marvinlee1** · 4 Weeks Ago

grasshopper you hit the nail dead center thank you very much.if i knew your address you would be on my xmas card list.Thank you again

**hack1987** · 2 Weeks Ago

I am also having the same problem, have you figured out how to get it to work? I keep getting the message "Waiting for request. Reset SetTop Box" , I've tried clicking download as soon as I turn the box on and before I turn the box on. Nothing seems to work.