Continuous Scrambled Channel? - ABA DSS

orrene · December 12th, 2008

No matter which of the recent bins are installed (most recently 199), CS 7000 says "Scrambled Channel." Presuming these bins really are working, is there something else that is causing this problem? Until about a month ago, there was no problem merely installing a new bin (presumably writing over the previous non-working bin) and the new software worked correctly. Thanks much to testers for the help.

**creativegenius** · December 13th, 2008

What SAT(s) you trying to get ... ?

If you are aimed at BEV, you are going to want to forget that one for a bit.

Creative Genius

**SatelliteJunkie** · December 13th, 2008

Quote:

Originally Posted by orrene

No matter which of the recent bins are installed (most recently 199), CS 7000 says "Scrambled Channel." Presuming these bins really are working, is there something else that is causing this problem? Until about a month ago, there was no problem merely installing a new bin (presumably writing over the previous non-working bin) and the new software worked correctly. Thanks much to testers for the help.

Try a power reboot from rear & wait few minutes.
If no good...load the factory file then load bin 199 & do a reset & start over.
Check to be sure autoroll is ON.

**JNITRO** · December 13th, 2008

Ya man if tryin for b€v, for get about it, she's a long time coming!

orrene · December 13th, 2008

This is for DN, not bev. Did the hard reboot from the back of the CS 7000 and it shows Scrambled Channel. Per suggestion, will instead load the factory bin 114 via the USB, then reboot from the back switch, then load the latest bin 199, reboot from the back. Is that exactly what should be done or are there other steps? Thanks much.

**SatelliteJunkie** · December 13th, 2008

Quote:

Originally Posted by orrene

This is for DN, not bev. Did the hard reboot from the back of the CS 7000 and it shows Scrambled Channel. Per suggestion, will instead load the factory bin 114 via the USB, then reboot from the back switch, then load the latest bin 199, reboot from the back. Is that exactly what should be done or are there other steps? Thanks much.

No need to reboot between each step.
Just load the factory file...then load bin199...then do a reset...make settings...autoscan birds.
After you complete these steps & it still says "Scramble Channel"...then you do the power reboot from rear...off 10 seconds...ON & wait on channel 200.

**renesanseman2** · December 18th, 2008

is BEV working ?

**SatelliteJunkie** · December 18th, 2008

Quote:

Originally Posted by renesanseman2

is BEV working ?

No it is not. sorry
Maybe in a month or two...

**hotrod3815** · December 18th, 2008

Hi All
Yes Bev is down.But is there any news as to wuz up with it.where are we at with the fixs and stuff? Love to hear all about it .
Thanks
Rod

judejake · January 9th, 2009

Quote:

Originally Posted by SatelliteJunkie

No need to reboot between each step.
Just load the factory file...then load bin199...then do a reset...make settings...autoscan birds.
After you complete these steps & it still says "Scramble Channel"...then you do the power reboot from rear...off 10 seconds...ON & wait on channel 200.

where is bin 114

**SatelliteJunkie** · January 10th, 2009

Quote:

Originally Posted by judejake

where is bin 114

You must be refering to factory bin v114 (version114)...but it has been replaced/updated to bin 116. >>>

http://www.abadss.com/forum/466-cool...-081027-a.html

**frenchfry72** · January 11th, 2009

hi I was wondering if anyone can explain to me why my time on my guide keeps switching the time on me everytime i set the time it switches back to like 6 hours ahead of the actual time and it is driving me crazy anyone have any ideas ive never changed any of my settings just reloaded new bin and this time change has been happening thanks for any suggestions

tafelice · January 11th, 2009

Does anyone on the CS7000 thread actually use a CS7000???? Sorry, didn't mean to be a wisearse BUT the latest bin is 201. OKAY? Okay.<-(South Park impression) And this point is moot since we are in a downage. See FTA News and Announcements.

tafelice · January 11th, 2009

frenchfry, I don't know but in your setup see what timezone you are stating you are in. could be it is resetting you for the default timezone. OKAY? okay..<-(South Park impression)

Shouting is no allowed here! Thanks for helping this guy, but lose the attitude & stop shouting at fellow members or I will issue you an infraction next time! SJ

**frenchfry72** · January 11th, 2009

thanks 4 the quick respose I will check ( :

**Johnboy033** · January 11th, 2009

tafelice if you notice this thread was started 4 weeks ago when the bin was 199. As you know it is now 201. Hope this helps.

**SatelliteJunkie** · January 12th, 2009

Quote:

Originally Posted by tafelice

Does anyone on the CS7000 thread actually use a CS7000???? Sorry, didn't mean to be a wisearse BUT the latest bin is 201. OKAY? Okay. And this point is moot since we are in a downage. See FTA News and Announcements.

Quote:
Originally Posted by judejake
where is BIN 114

You must be refering to factory BIN v114 (version114)...but it has been replaced/updated to BIN 116. >>>

http://www.abadss.com/forum/466-cool...-081027-a.html

If your refering to my post, your out of line buddy!

I was talking about the Factory File version 114 (outdated) and version 116 (current)...which has nothing to do with a current working bin201. (which is down)

I don't see who else you are refering to, as the question posted by frenchfry was legit.

tafelice · January 12th, 2009

Sorry if anybody took offense. That was not a shout, it was actually an impression of a South Park character. It was intended to be humorous and not rude and not even humorous at anybodys expense. I've PMed the effected parties as I don't think it right to fully explain this publicly.

**rover1** · January 12th, 2009

am i crazy or is this system still down

**SatelliteJunkie** · January 12th, 2009

Quote:

Originally Posted by rover1

am i crazy or is this system still down

I am told that the coders are working on it...
It is odd that it is taking so long to fix.
But it is also just as odd that none of my SonicViews went down at all!
Be sure that we will post CS bins asap.