need help!!

[zh7000]

Hi,
i have got some problem with my coolsat 7000 , i downloaded the latest bin 214 and did the factory reset, after that the level bad on dish setting is showing 54% result and is orange in color due to that some channels are coming but not all and the international channels are not showing at all!! can someone help to explain why is the level bar orange and not green and why such low % is showing!!

[boboisno1]

Since you factory reset you probably entered something wrong in your antenna settings. Make sure you have the ports assigned properly, lnb freq 11250 and try diffent lnb types and see if the signal (Q) reading goes up.

[zh7000]

Thankyou for replying , and i did try that, but seems like that its not the anntenna setting, because i tried with the old bin 211 and the level and quality were awesome , as soon as i try 214 the level drops !

[boboisno1]

Ok now I'm stumped, good detective work by the way. I will look around and see if I can find out anything about this.

Originally Posted by zh7000

Thankyou for replying , and i did try that, but seems like that its not the anntenna setting, because i tried with the old bin 211 and the level and quality were awesome , as soon as i try 214 the level drops !

[bbarklr]

Originally Posted by zh7000

Thankyou for replying , and i did try that, but seems like that its not the anntenna setting, because i tried with the old bin 211 and the level and quality were awesome , as soon as i try 214 the level drops !

some bin files have there own settings(do to the fact that coders are people to an some times forget to remove there settings)
check the settings for your lnb on 211 then make sure they have not changed with 214(wright then down)if they have changed then just change then to the setting for the 211 bin(most of the time its the disq.swt setting )

[zh7000]

Thankyou for trying to help , but as i mentioned earlier i did try with previous setting but unfortunatley no luck. the level bar still shows orange with 45% on 214 , and last night the ecm went down! but my question is that in the previous bins the level is picking up but as soon as i try 212-214 bin the level went down and on 214 it picks up but a weak 45% strength! this is what is confusing me!

[bbarklr]

Originally Posted by zh7000

Thankyou for trying to help , but as i mentioned earlier i did try with previous setting but unfortunatley no luck. the level bar still shows orange with 45% on 214 , and last night the ecm went down! but my question is that in the previous bins the level is picking up but as soon as i try 212-214 bin the level went down and on 214 it picks up but a weak 45% strength! this is what is confusing me!

i understand what your saying,
but u may not have understod me,

befor most of these files are downloaded to the files sec, there tested by the coaders,
now the coaders have there boxes set up to there own setings(such as 110 on no diq.swt singel lnb at 11250)
if your running a diq.swt. an u put in a bin that changes your settings to no diq.swt. then you not going to get good singel(most, nearly all of the time they remove there settings and unless u do a fac.reset then your box is not efeceted )but sone times things get though that arent saposto (so u have to check your setting on antania setup make sure there set to your configeration and have not changed

[zh7000]

i am just wondering is it just me or anyone else is also having the problem with bin 215 the same as bin 214 , the level bar is showing 47% and the quality is 85% and due to that channels are not picking up! can anyone explain me what am i doing wrong, my dish setting is set on echostar 148 and frequency is 11250 , rest of the frequencies it shows 0% on both level and quality ! thankyou for replying and trying to help me out here, i appreciate it!