ABA DSS - Free to Air Satellite TV Community - View Single Post

**grasshopper** · October 7th, 2006

Here's how to manually Load Keys for the Coolsats:

On your remote control,
Press 8282, this will bring up the Key Edit menu. The #1 box at the top should say Nagravision. If box #1 does not say Nagravision, you may need to scroll to box #72 using the right or left arrow buttons on your remote. The CAS should read Nagravision. The Ident should read Dish Network (0001), below that, there should be 4 boxes on the left that have 10, 11, 20, 21 in them with numbers and letters to the right of those numbers. This is where the current key data is located and may need to be changed manually from time to time. Autoroll files normally make these steps unnecessary but the occasional unforseen circumstances make changing the data necessary but easy to do.

UPDATED INSTRUCTIONS/INFO:
Press the down arrow button to highlight whichever is the Current Active Key(s) which will be either
10 or 11 = Key 00 Data / 20 or 21 = Key 01 Data or both as determined by the Key gathering program you are using such as CyberDBS, KeyMaster, Get Keys, Jeepers, Maestra etc.,

October 7th, 2006	#1 (permalink)
grasshopper Super Moderator Join Date: Apr 2005 Location: Far Far Away Posts: 7,408 Thanks: 411 Thanked 15,568 Times in 2,459 Posts Rep Power: 63	How to enter keys manually for Coolsat Here's how to manually Load Keys for the Coolsats: On your remote control, Press 8282, this will bring up the Key Edit menu. The #1 box at the top should say Nagravision. If box #1 does not say Nagravision, you may need to scroll to box #72 using the right or left arrow buttons on your remote. The CAS should read Nagravision. The Ident should read Dish Network (0001), below that, there should be 4 boxes on the left that have 10, 11, 20, 21 in them with numbers and letters to the right of those numbers. This is where the current key data is located and may need to be changed manually from time to time. Autoroll files normally make these steps unnecessary but the occasional unforseen circumstances make changing the data necessary but easy to do. UPDATED INSTRUCTIONS/INFO: Press the down arrow button to highlight whichever is the Current Active Key(s) which will be either 10 or 11 = Key 00 Data / 20 or 21 = Key 01 Data or both as determined by the Key gathering program you are using such as CyberDBS, KeyMaster, Get Keys, Jeepers, Maestra etc.,