ABA DSS - Free to Air Satellite TV Community - View Single Post

**RagingBull** · October 10th, 2008

I assume that since you said twin that your LNB looks like the second one up above with the 2 eyes. If it does not have a DP on it anywhere then it is a Legacy twin not a DP Twin. The settings Cisco gave you up above are correct except for LNB type which will be Legacy Twin if your box has that setting or probably Standard if it does not.

You only need 1 cable down from the LNB for each receiver you have. The Diseq is in the LNB so both sats are on the same cable.

October 10th, 2008	#7 (permalink)
RagingBull Veteran Abadss Member Join Date: Nov 2007 Posts: 1,749 Credits: 1,063.20 Thanks: 551 Thanked 870 Times in 559 Posts	Re: Have DN500 twin lnb I assume that since you said twin that your LNB looks like the second one up above with the 2 eyes. If it does not have a DP on it anywhere then it is a Legacy twin not a DP Twin. The settings Cisco gave you up above are correct except for LNB type which will be Legacy Twin if your box has that setting or probably Standard if it does not. You only need 1 cable down from the LNB for each receiver you have. The Diseq is in the LNB so both sats are on the same cable.