Help with Nfusion settings...!!!

[rdefrei2]

Hello,

I've my Nfusion Solaris was working fine till a few days ago, now for some reason I cannot get the channels to work again. Now I just have a few channels working, 162 is one off them.

Before, several channels were working,.

I've played with the settings and now I don't know what would be the correct one.

My Nfusion is a Solaris, with latest bin 1.51.3 on it.

Antenna Settings is as follow:

Satellite 119.0 W Echostar7 (I'm in Tampa - FL) and use to have DN.
LNB Standart
LoFreq 11259
22KHZ Off
DiseqC1.0 Port1
DiseqC1.1 Disable
Multi Dish Disable
Lock TP 3/25 12253 V 20000
Motor Off
LNB power ON

Local Area St. Petesburg FL
Channel Guide By Time
EPG update Auto
Dolby Digital Off
Autoroll Dish
Emulator On
Primary Channel Dish

Could someone give me a hand ....

Thanks.

[f1nuts]

emulator is supposed to be off ?....at least i think...!

[creativegenius]

Turn EMU (emmulator) to off just as suggested above.

Creative Genius

[rdefrei2]

I will turn EMU off and will test it again...

[Victor Hugo]

Originally Posted by rdefrei2

Hello,

I've my Nfusion Solaris was working fine till a few days ago, now for some reason I cannot get the channels to work again. Now I just have a few channels working, 162 is one off them.

Before, several channels were working,.

I've played with the settings and now I don't know what would be the correct one.

My Nfusion is a Solaris, with latest bin 1.51.3 on it.

Antenna Settings is as follow:

Satellite 119.0 W Echostar7 (I'm in Tampa - FL) and use to have DN.
LNB Standart
LoFreq 11259
22KHZ Off
DiseqC1.0 Port1
DiseqC1.1 Disable
Multi Dish Disable
Lock TP 3/25 12253 V 20000
Motor Off
LNB power ON

Local Area St. Petesburg FL
Channel Guide By Time
EPG update Auto
Dolby Digital Off
Autoroll Dish
Emulator On
Primary Channel Dish

Could someone give me a hand ....

Thanks.

To ABA family, enjoy your stay.

[rdefrei2]

Still no change ....
Channel 162 works fine the others are dead.

[f1nuts]

did you re-scan sats agian....also...my tp is different to what yours states... try a different one and see what kind of signal/quality you get....

i had similar problem with mine a while back...better signal sorted it out for me

[robert ferreira]

Originally Posted by rdefrei2

Hello,

I've my Nfusion Solaris was working fine till a few days ago, now for some reason I cannot get the channels to work again. Now I just have a few channels working, 162 is one off them.

Before, several channels were working,.

I've played with the settings and now I don't know what would be the correct one.

My Nfusion is a Solaris, with latest bin 1.51.3 on it.

Antenna Settings is as follow:

Satellite 119.0 W Echostar7 (I'm in Tampa - FL) and use to have DN.
LNB Standart
LoFreq 11259
22KHZ Off
DiseqC1.0 Port1
DiseqC1.1 Disable
Multi Dish Disable
Lock TP 3/25 12253 V 20000
Motor Off
LNB power ON

Local Area St. Petesburg FL
Channel Guide By Time
EPG update Auto
Dolby Digital Off
Autoroll Dish
Emulator On
Primary Channel Dish

Could someone give me a hand ....

Thanks.

tunn your emulator off and the lofreq is 11250

[macaronicaesar]

Originally Posted by robert ferreira

tunn your emulator off and the lofreq is 11250

Exactly and TP should be 12224 and rescan sat and you will be fine.

[creativegenius]

Yup, missed that Low Freq is set wrong, follow the advice above

Creative Genius

[snakebite]

your low feq should be 11250 .try that and let me no,also try scanning with tp freq -of 12239 .

[medicat]

shouldn't the bin be 1.51.3 ?

[snakebite]

Originally Posted by medicat

shouldn't the bin be 1.51.3 ?

yes it should be 151.3 and that is what he said was loaded.

[creativegenius]

Let's clean this thread up a tad, there are like 3 conversations going on in here.

Creative Genius