[jbottlin]

Currently I am testing a DPP 500 e*cho 7 and 8 running through a dpp 33 switch for my SV el*te ih*b and kb*x pro kh*b, and soon another receiver. I want to add 91 to my current configuration, if I keep my dpp 500 and add another dish and run the feed into the 3rd spot of the dpp 33 switch will that work? Second option is i get a eliptical dish 18"x24" and ditch the dpp 500, will a dpp 33 switch work with that dish e.g. dreamstar toroiptical 55 dish package?
My new configuration needs to satisfy these requirements: Receive 91, 110, and 119 while feeding three receivers. Any and all input is greatly appreciated, thank you in advance for your response.

[y0da]

option 1 works fine -- DPP500 + extra dish/lnb in 3rd port

option 2 would work fine as well.

I must say, though...that you can probably get 91 if you hang a 3rd LNB off of your D500. It will take some messing, but it can be done. I have a dish500 pulling in the standard 110/119, and i used a wood block and a ziptie with an additional LNB to get 129 on it. You can get 91 most likely, depending on where you are

[satmaxx]

Originally Posted by y0da

option 1 works fine -- DPP500 + extra dish/lnb in 3rd port

option 2 would work fine as well.

I must say, though...that you can probably get 91 if you hang a 3rd LNB off of your D500. It will take some messing, but it can be done. I have a dish500 pulling in the standard 110/119, and i used a wood block and a ziptie with an additional LNB to get 129 on it. You can get 91 most likely, depending on where you are

y0da can you share a pix of your 91 lnb addition..need 91 and would like to avoid poking holes in the roof for a second antenna..

[jbottlin]

Thanks for your input, my only real worry was that the ddp 33 switch wouldn't be compatible with the circular LNB needed for 91. Thanks again.

[y0da]

dp34 is compatible with circular LNB.