ABAdss Free to Air Satellite Forums

99builder · November 24th, 2009

trying to hook up ihub

ihub 1.4
sv 360 premier
sv version _0256
Belkin G Plus router
server is PPPoE

ipconfig shows up in installation menu
from wiznet
local ip 192.168.11.2
subnet 255.255.255.0
gateway 192.168.11.1
dns server 208.67.222.222
port 1920
serial number ok
when I click apply - the message says "please wait about 30 seconds....!"
But it never gets past this.

Tried DHCP and Static - same result

Help needed. Thanks

jc7257 · November 24th, 2009

The new SV server requires the use of 1.9 wiznet and the new file to match your STB make. Here is the 1.9 file...
http://www.abadss.com/forum/484-soni...ib-v1-9-a.html
here is the file you need for the SV Premier 360...
http://www.abadss.com/forum/960-sv-3...v257-ihub.html

CHOPPER103IN · November 24th, 2009

mine was real slow,the 30 seconds turned in to about 3min.

99builder · November 26th, 2009

waited over 1 hour and still not connected.

tried to install 1.9 ihub and v82 showed up instead

November 24th, 2009	#1 (permalink)
99builder FTA Newbie Join Date: Nov 2009 Posts: 5 Credits: 143.80 Thanks: 0 Thanked 0 Times in 0 Posts	premiere 360 - help needed trying to hook up ihub ihub 1.4 sv 360 premier sv version _0256 Belkin G Plus router server is PPPoE ipconfig shows up in installation menu from wiznet local ip 192.168.11.2 subnet 255.255.255.0 gateway 192.168.11.1 dns server 208.67.222.222 port 1920 serial number ok when I click apply - the message says "please wait about 30 seconds....!" But it never gets past this. Tried DHCP and Static - same result Help needed. Thanks

November 24th, 2009	#2 (permalink)
jc7257 Moderator Join Date: Jul 2006 Location: Redneck Country Posts: 13,544 Credits: 18,287.22 Thanks: 2,331 Thanked 12,306 Times in 4,865 Posts	Re: premiere 360 - help needed The new SV server requires the use of 1.9 wiznet and the new file to match your STB make. Here is the 1.9 file... http://www.abadss.com/forum/484-soni...ib-v1-9-a.html here is the file you need for the SV Premier 360... http://www.abadss.com/forum/960-sv-3...v257-ihub.html __________________ *Click Here For Fun and Excitement* Having Payment and Access Problems Be a VIP Member If I have helped you, please use the THANKS button...

November 24th, 2009	#3 (permalink)
CHOPPER103IN Knows FTA Join Date: Feb 2008 Location: ILLINOIS Posts: 139 Credits: 636.40 Thanks: 94 Thanked 19 Times in 17 Posts	Re: premiere 360 - help needed mine was real slow,the 30 seconds turned in to about 3min.

November 26th, 2009	#4 (permalink)
99builder FTA Newbie Join Date: Nov 2009 Posts: 5 Credits: 143.80 Thanks: 0 Thanked 0 Times in 0 Posts	Re: premiere 360 - help needed waited over 1 hour and still not connected. tried to install 1.9 ihub and v82 showed up instead

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

ABAdss Free to Air Satellite Forums

Member Panel

Find Top Dealers

What's New

Site Sponsors

Forum Stats

Translate Abadss

Hot Deals

Tag Cloud

Keywords

Related Content
Cool Deals! __________________ Cool Deals